Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Linked belt
-
18th September 2018, 08:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Linked belt
Just fitted a B \ 5L size linked belt on my Sheraton 9 lathe.
The belt width measures around .650" it sits high in the pulley grooves
I had a automotive style belt fitted which was a compromise, it was noisy and vibrated,
The linked belt is quieter no doubt but dissapointingly it isn't completely vibration free.
Been playing with speeds , the belt seems to whip up/down at all speeds.
Read the full thread at metalworkforums.com...
-
18th September 2018 08:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
The non forum sponsor adds - Linked to some central register???
By BobL in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 7Last Post: 5th July 2015, 07:48 PM -
Linked belting
By morrisman in forum METALWORK FORUMReplies: 18Last Post: 20th August 2014, 09:55 PM -
which lathe should you choose , one out of the two linked inside?
By thorens in forum METALWORK FORUMReplies: 18Last Post: 16th July 2013, 12:20 PM -
Good quality linked chain for jewellery boxes
By Barry F in forum WOODWORK - GENERALReplies: 4Last Post: 13th December 2005, 04:38 PM