Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: materials Mass Data
-
30th May 2007, 02:52 PM #1
Member
- Join Date
- Oct 2006
- Location
- Newcastle
- Posts
- 81
materials Mass Data
anyone know where i can find information on the mass per kg on different metals ?
would like to find the difference in mass between Bronze/Brass and Stainless steelLathe - Hafco AL320G
Mill/Drill - Toolex RF31
-
30th May 2007 02:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th May 2007, 04:18 PM #2
Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
-
30th May 2007, 07:47 PM #3
Member
- Join Date
- Oct 2006
- Location
- Newcastle
- Posts
- 81
beautiful, just what I was after
Lathe - Hafco AL320G
Mill/Drill - Toolex RF31
-
30th May 2007, 11:07 PM #4
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
Just a heads up that the brass or bronze you have in your hot little hand may not be the one and only referred to on that site.
For example brass on that site is given as 8.48 g/cc whereas brass can theoretically be anywhere between the density of it's constituent metals, Zn 7.12 g/cc and Copper of 8.94 g/cc. In practice the density ranges from 8.75 down to about 8.40 g/cc.
If you want this level of details for 63,000 different materials (including about 30 different brasses) try this site.
http://www.matweb.com/index.asp?ckck=1
-
31st May 2007, 12:28 AM #5
Hitter of thumbs, Arrrgh!
- Join Date
- Sep 2005
- Location
- campbelltown NSW
- Age
- 67
- Posts
- 623
Great guy's two good site's bookmarked both, thanks!....
savage(Eric)
Never, under any circumstances, take a sleeping pill and a laxative on the same night.
Similar Threads
-
Bead Making - Mass Production?
By MAPLEMAN in forum WOODCARVING AND SCULPTUREReplies: 5Last Post: 4th November 2006, 08:42 PM
