Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Micro gas fuel torch
-
8th January 2019, 07:40 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,434
Micro gas fuel torch
Not sure whether this is a question for the jewellery crowd or not, or perhaps the welders. We are currently cleaning out a cupboard in a workshop welding bay that contains a lot of old oxy/acetylene gear in it. It's being chucked because of the unknown condition of the seals as well as some of the hoses are looking pretty crusty. There are some odd looking torches in there though and some of them look a little like this. I can't confirm a maker's name although I think I saw analine or something similar stamped on the valve block. Not sure whether it is oxy or air, or what the fuel is (I suppose it could either be propane or acetylene)
IMG_0513.JPG
We rarely do much in this welding bay besides TIG or Stick and it would not have been used for at least 4 or 5 years, but there may be others at the uni who would very much appreciate it (glassware makers maybe?) if we could identify what it was.
Any ideas?
Michael
Attached Images
- IMG_0513.JPG (121.6 KB)
Read the full thread at metalworkforums.com...
-
8th January 2019 07:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Which SD card - Micro, Ultra Micro, Class 10, class 4????
By FenceFurniture in forum COMPUTERSReplies: 28Last Post: 29th April 2018, 04:27 PM -
Another Torch
By gawdelpus in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 6th July 2014, 12:35 PM -
gas micro torch
By Lyle in forum METALWORK FORUMReplies: 6Last Post: 21st February 2011, 11:27 AM -
Who has an oxy cutting torch ?
By Grahame Collins in forum METALWORK FORUMReplies: 33Last Post: 18th October 2007, 02:58 PM -
Blow torch
By jmk89 in forum HAND TOOLS - POWEREDReplies: 3Last Post: 17th July 2007, 12:29 AM