Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Mist Coolant systems
-
31st May 2018, 12:30 PM #1
Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,425
Mist Coolant systems
Gents, following on from Krisfarms post in The "Latest projects" thread, I thought I would start a new thread on this topic.
Look on ebay I see a basic fluid/air mixer like this one starts at around $10
https://www.ebay.com.au/itm/Cutting-...AAAOSwytJaN5F7
Screen Shot 2018-05-31 at 8.36.09 am.png
Those that look like Kris's mixer look like have needle valve controls at the mixed and look like this cost a bit more
https://www.ebay.com.au/p/Mist-Coola....c100005.m1851
Screen Shot 2018-05-31 at 8.35.46 am.png
Does anyone know of any others?
Attached Images
-
Screen Shot 2018-05-31 at 8.36.09 am.png (231.9 KB) - Screen Shot 2018-05-31 at 8.35.46 am.png (136.9 KB)
Read the full thread at metalworkforums.com...
-
31st May 2018 12:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Mist Spray
By SAISAY in forum CNC MachinesReplies: 8Last Post: 23rd January 2016, 07:52 PM -
Surface grinder kicking up mist/fog
By variant22 in forum METALWORK FORUMReplies: 18Last Post: 11th June 2015, 10:12 PM -
Router jig systems
By sinjin in forum ROUTING FORUMReplies: 1Last Post: 21st May 2008, 09:29 PM -
Hollowing Systems
By WOODbTURNER in forum WOODTURNING - GENERALReplies: 27Last Post: 12th January 2008, 01:57 PM
