Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
23rd March 2019, 02:11 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
Moisture inside metal SHS question .
Hi . I have some timber racks I have to weld back together . They are made from 50 x 50 x 3 SHS . I cut them in half for transport two years ago .
If steel is welded back together and the ends are sealed up as well, does the moisture inside get used up in the rusting process ?
Or does it continue to react and keep rusting ?
Im just wondering . The racks legs are sealed at the bottom but open at the top . And the top is covered by the roof so its going to be fine Id say
Rob
Read the full thread at metalworkforums.com...
-
23rd March 2019 02:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Need advice about how to grind and polish inside of metal pieces
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 14th November 2018, 03:00 PM -
Question - re: Sanding the inside
By Fumbler in forum BOX MAKINGReplies: 11Last Post: 21st June 2017, 03:55 AM -
spraygun moisture trap question
By old_picker in forum FINISHINGReplies: 4Last Post: 23rd June 2016, 07:53 PM -
Picture of inside bookshelves (metal or wood)
By warchant76 in forum WOODWORK - GENERALReplies: 1Last Post: 7th January 2011, 10:37 PM