Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: O1 carbon steel - purchase
-
23rd June 2013, 12:54 PM #1Ring Master
- Join Date
- May 2006
- Location
- Lake Macquarie NSW Australia
- Posts
- 402
O1 carbon steel - purchase
Where can I go in Newcastle/Hunter region NSW Australia
and physically purchase flat bar 2 or 3mm x 40 & 50mm wide
in small quantities i.e. 1.000m
I do not want to order on ebay or internet.
regards, Ned
-
23rd June 2013 12:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd June 2013, 01:39 PM #2I now have 3 sheds
- Join Date
- Aug 2010
- Location
- Soldiers Point, NSW
- Age
- 60
- Posts
- 185
Ned..... Not sure where in Lake Macquarie you are but Bluescope Steel at Cardiff does stock a range of steel products (including flat). If that is no good then let your fingers do the walking and type steel merchants into the Yellow Pages directory. Even small fabricating workshops will often sell small quantities of steel, I'm sure there will be one near you. I usually use Hunter Metal Mart at Heatherbrae but that would be further than you need to travel I'm sure..... regards Twosheds.
-
23rd June 2013, 01:49 PM #3
Hi Ned,
Do you specifically want O1, or do you just want high carbon steel? If it's for a blade, ( just guessing ) there are other sources of high carbon steel.
I know you specifically said don't want to buy on-line, but $14 for 18" x 2" x 1/8" is hard to beat.. Precision Ground O1 Oil Hardening Flat Ground Stock / Tool Steel plus postage
Regards
Ray
-
23rd June 2013, 02:06 PM #4
Victor's is the cheapest by a long way, even after post. I can't get anything but round locally, and its pricey once you get up to any decent size.
Cheers,
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
23rd June 2013, 05:57 PM #5SENIOR MEMBER
- Join Date
- Sep 2009
- Location
- Newcastle
- Posts
- 549
Bohler-Uddeholm (Cardiff) carry quite a range of steel, but mostly round I think. Happy to sell in small quantities by weight.
-
24th June 2013, 08:45 AM #6Ring Master
- Join Date
- May 2006
- Location
- Lake Macquarie NSW Australia
- Posts
- 402
Thanks guys for the leads I'll give them a try.
regards, Ned
Similar Threads
-
Carbon Steel Bandsaw Blades
By Auskart in forum METALWORK FORUMReplies: 7Last Post: 27th February 2013, 07:09 AM -
Cutting high carbon steel
By rsser in forum HAND TOOLS - UNPOWEREDReplies: 13Last Post: 12th February 2011, 04:32 PM -
carbon steel and hss
By ss_11000 in forum WOODTURNING - GENERALReplies: 26Last Post: 30th December 2009, 04:31 PM -
Tool Steel purchase (for home made blades)
By Clinton1 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 12Last Post: 5th December 2006, 07:14 AM -
high carbon steel
By schaf in forum WOODWORK - GENERALReplies: 4Last Post: 5th November 2005, 08:15 AM