Have acquired a Parkanson PHS and want to cut some angle iron at 45 degrees. The vice allows this but the material doesnÂ’t then fall within the blade stroke. Tried putting packing behind the angle iron to bring it within the cutting stroke but the material keeps coming loose. The saw cuts on the forward stroke and lifts on back stroke.
Suggestions please.

I am really happy with square cuts and have cut lots of square tube and solid square and round bar. I have put a new single phase motor in and am using a small electric fountain pump for coolant as the original was missing. Made a replacement motor cover and Have started repainting the machine green with Rustoleum but may start again with POV15 as I used it on an old lathe and am very impressed.

FC4274E9-8FD5-4BEB-A40B-8FAA9718A4DC.png
Attached Images




Read the full thread at metalworkforums.com...