Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: PEZ20 Steel?
-
6th July 2015, 03:02 PM #1.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
PEZ20 Steel?
Was at the steel merchants today checking out their steel scrap bin and came across what looked like a 500mm length of 25mm stainless round bar.
Now that I have it home I can see what looks like a very faint PEZ20 painted on one end.
Anyone know what that might mean?
It is magnetic
I've check out the web but can't see any reference to this code?
-
6th July 2015 03:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th July 2015, 05:14 PM #2Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Batch number?
Light red, the colour of choice for the discerning man.
-
6th July 2015, 05:23 PM #3SENIOR MEMBER
- Join Date
- Jul 2011
- Location
- Melbourne Australia
- Posts
- 1,128
Only thing I can think of is P20. But that's a long way off of being a Stainless. It might look similar if it was bright. Its a polishing grade of mold steel. I've seen others (Bohler) call it M200. It takes to nitriding really well. I've made some of my test arbors out of it.
Its not that exotic, that a lenght could have turned up at a general steel merchant. Tool Makers love it.
Regards Phil.
-
6th July 2015, 05:53 PM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
Thanks Guys,
The merchant is a very standard steel merchant although they now have separate scrap bins for ally and SS plate, although I have never seen them stock SS bar.
They have a couple of scrap areas in the factory and this bar was in an area that is not always trawled over by the usual scrap hunters.
-
9th July 2015, 06:29 PM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
Similar Threads
-
mild steel to stainless steel
By cava in forum WELDINGReplies: 8Last Post: 27th November 2014, 06:48 AM -
Supplier of high speed steel and tool steel bar and spring steel in melbourne?
By fudo133 in forum METALWORK FORUMReplies: 3Last Post: 25th June 2014, 12:44 PM -
Triton Steel Cutter and DIY steel tubes
By Intheshed in forum TRITON / GMCReplies: 51Last Post: 6th January 2005, 12:56 AM