Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: Poor man's DRO
-
6th August 2012, 07:15 PM #1
Poor man's DRO
Have been procrastinating for some time on what DRO to get for my DM45 mill.
Had some trouble justifying $500-600 dollars for a 3 axis glass scale DRO for the sort of work I do, don't really need all the fancy features. At the same time I am so used to having a DRO on the lathe that I feel handicapped when I use the handwheels on the mill.
So the other day I bit the bullet and bought a 40" and a 24" LCD digital DRO scale from ozmestore on Ebay, I already have a DRO on the quill (Z axis). For $100 I was willing to give these a go and see how they perform.
Next I had to work out how to mount these on the mill.
Started with X axis and decided to use the existing dovetail track on the front of the table, already used for mounting the limit stops.
Made up a mounting bracket that used the dovetail nut from the limit stop and recessed it to accept the mounting bracket that came with the DRO scale.
Two of these will take the actual scale, the sensor unit was then mounted on the existing pointer.
Next the Y axis.
This made use of the 2 mounting bolts in the base of the mill, using some brackets made up.
After making sure the scale was level, using a DI, it was on to the displays.
Looked at several different options for mounting these, including some of the smaller LCD monitor brackets.
In the end I decided to use the existing mounting arrangement for the safety guard, never used since I got the mill.
This had the advantage that it can be swung out of the way when I need to raise the or lower the mill head.
Decided to make space for a Z axis readout as well, as I may replace the existing one if these work out OK.
Finally, a guard for the X axis
All I need to do now is tidy up the wiring and work out how to put a guard over the Y axis scale.
Last edited by Big Shed; 11th September 2012 at 04:55 PM.
-
6th August 2012 07:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th August 2012, 07:39 PM #2
Nice job Fred
I bet it will make work a lot easier. Be interested to hear what you think of the accuracy of these scales.1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
6th August 2012, 07:43 PM #3GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Port Huon
- Posts
- 2,685
You must have got the last scales as ozmestore1 no longer list them
The look much better that the ones with LCD, buttons etc. Do they use the 'standard' scale protocols so you could hook them up to something like the Shumatech DRO at some point in the future?Geoff
The view from home
-
6th August 2012, 07:49 PM #4
-
6th August 2012, 07:50 PM #5
good
I am following this with interest as I have the same DM 45 machine .... let us know how it all turns out . BTW the other guy who has a Standaco DM 45 will no doubt be glued to this thread MIKE
-
6th August 2012, 07:51 PM #6
Good to see that you have a found a good use for the guard. Mines sitting around somewhere collecting dust.
www.lockwoodcanvas.com.au
I will never be the person who has everything, not when someone keeps inventing so much cool new stuff to buy.
From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".
-
6th August 2012, 07:52 PM #7
-
7th August 2012, 11:39 AM #8
Just had a reply from ozmestore on Ebay to my question about future availability
"Sorry mate sold out"
B*gger
-
7th August 2012, 11:41 AM #9Senior Member
- Join Date
- Apr 2010
- Location
- ringwood vic
- Posts
- 251
G'Day Fellas,
I fitted the same scales to my RF31 a couple of months ago and consider it the best $100 I have spent, from what I can see the scales are unbranded OEM versions of the Igaging units and can be interfaced with the Shumatec DROs. To tidy up and protect the rather flimsy cables I ran them through 10mm split conduit from Jaycar, and as I found the cables a bit short to run them where I wanted them I had to add a couple of mini USB extension cables. To date I have found the accuracy more than adequate for the work I do. The only anomaly I have noticed is a shift in the zero position of about .01mm overnight on very cold Melbourne nights, I don't know whether this due to expansion and contraction or variations in battery voltage. I had concerns about battery life, but so far,the supplied batteries are holding up OK. The only irritation is the display shutting down every 4 minutes, but for the price I can live with it.
Regards,
Martin
-
7th August 2012, 01:05 PM #10GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Nice one big shed.
Did you lose any travel?
I just thought of something you guys would already know, if these are like the digital verniers you dont loose 0. With glass scale DRO you do(ok technically I think they do have a ref point but I've never tried that I just make sure I turn the DRO on before I move the axis if I left a job on the mill over night)
Stuart
-
7th August 2012, 01:27 PM #11future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
I fitted one to my mill but the y axis is not very accurate if I give it. abit of a nudge it reads right do you think I leveling it will help the accuracy.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
7th August 2012, 01:36 PM #12
What length extension cables did you get? Looking at getting some from Ebay.
No, the mounting points sit outside the travel limits of the mill.
When you say "not very accurate", how is it inaccurate?
If you can "give it a nudge" perhaps the mounting points aren't all that stable?
Both my X and Y axis are accurate and repeatable. I made sure that both the scales were in line with the travel and level, using a dial indicator as shown. Did the same with my glass scales on the lathe.
-
7th August 2012, 01:49 PM #13Senior Member
- Join Date
- Apr 2010
- Location
- ringwood vic
- Posts
- 251
G'Day,
The extension cables I bought were 500mm, the Ebay seller was 2buy2u, price was about $7.00 for 2 posted, delivery took about 10 days, the only local seller I could find who stocked them wanted about $30.00 each (and they wonder why we buy overseas).
Regards,
Martin
-
7th August 2012, 02:38 PM #14
I was going to buy his 6" RT, chuck and indexing plates a while back. Same reply, sorry mate sold out, but i have seen he has got more since, so i would keep your eye out.
Arc euro have them too, not sure how much you paid Fred, a 12" is 31 quid, plus you can get 1, 2 or 3 axis display units but the 3 axis is 85 quid.1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
7th August 2012, 05:01 PM #15
Similar Threads
-
Poor man's Brobo?
By neksmerj in forum METALWORK FORUMReplies: 18Last Post: 12th June 2011, 10:13 AM -
Is this the poor man's Domino?
By Big Shed in forum HAND TOOLS - POWEREDReplies: 10Last Post: 13th November 2008, 10:05 PM -
Poor man's workbench dogs
By sumu in forum THE WORK BENCHReplies: 4Last Post: 7th December 2007, 12:51 PM -
Poor man's security system
By Baz in forum WOODIES JOKESReplies: 3Last Post: 4th February 2006, 12:46 AM -
Poor Man's Catalog
By Poorman in forum HAND TOOLS - POWEREDReplies: 0Last Post: 31st December 2005, 11:03 AM