Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Prting/Cutting on the Shaper-2
-
29th March 2013, 09:46 PM #1
Prting/Cutting on the Shaper-2
Hi all, this was just to be a follow up from this thread https://www.woodworkforums.com/f65/pa...4/#post1526282 but we still can't post in old threads, so here is the post in a new thread.
Just a bit of a follow up on this.....
I cut a couple of vise jaws today from a length of 180x12. Still not having bought that bandsaw (i would have...but then Mlle came along) i set up the shaper to part them off. Once again i had problems, i used some oil, which helped and then like magic i upped the DOC and all of a sudden it cut really well. Moral is if you want to use a parting tool on the shaper, keep the DOC up!1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
29th March 2013 09:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th March 2013, 08:18 AM #2SENIOR MEMBER
- Join Date
- Oct 2011
- Location
- sydney
- Posts
- 880
HI Ueee,
Any photo's of the process or tools?
Cheers Ben
-
30th March 2013, 09:24 PM #3
Hi Ben,
Here is the video i did when i first tried it. The parting blade is 1 3/8" x 1/4".
I'm not sure how a douglas would go, even with a 3/32" wide blade. Could be worth a try though.....
1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
Similar Threads
-
Parting/cutting on the shaper
By Ueee in forum METALWORK FORUMReplies: 11Last Post: 27th July 2012, 01:30 PM -
shaper
By jonroe in forum METALWORK FORUMReplies: 3Last Post: 27th September 2011, 12:02 AM -
TOS shaper
By Bryan in forum METALWORK FORUMReplies: 91Last Post: 16th March 2011, 05:58 PM