Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Really small QCTP's?
-
8th February 2018, 07:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,425
Really small QCTP's?
This is the current tool post on the ML10.
P2080001.JPG
It is usable but a QCTP would be nicer. Trouble is, there is only 13mm between the axis of the lathe and the top of the compound. I have some 5/16" HSS blanks but boring bar plus clamp block is around 1/2". I thought I had saved a set of drawings for a DIY multifix tool post that someone posted, but my filing system has defeated me on this one.
So, has any one got a copy of those drawings (or can find the link); alternately, does anyone know of a really compact design of tool post (either commercial or available for metal working types) that may form the basis of something or even just bolt straight on?
Michael
Attached Images
- P2080001.JPG (85.3 KB)
Read the full thread at metalworkforums.com...
-
8th February 2018 07:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
re QCTP's
By texx in forum METALWORK FORUMReplies: 8Last Post: 28th April 2014, 09:02 PM -
New QCTP - which one?
By markjaffa in forum METALWORK FORUMReplies: 3Last Post: 16th November 2009, 05:04 AM -
Right QCTP for me?
By ElDubya in forum METALWORK FORUMReplies: 2Last Post: 12th November 2008, 11:51 PM -
H&f Qctp
By Beerbotboffin in forum METALWORK FORUMReplies: 11Last Post: 7th November 2007, 05:36 PM