Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 18 of 18
-
7th July 2015, 08:59 AM #16SENIOR MEMBER
- Join Date
- Oct 2011
- Location
- sydney
- Posts
- 880
Hi Baron J,
Nice work. How about a photo of it in-situ or working?
Ben
-
7th July 2015 08:59 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th July 2015, 02:15 AM #17
Hi Ben,
Not a problem ! Wife and I are out all day tomorrow but I'll take some photographs Thursday when I can get back into the workshop. In fact I have to part off another chunk of inch silver steel to make the second pair of support bolts for my electrically driven step.Best Regards:
BaronJ.
-
10th July 2015, 06:56 AM #18
Promised Photographs.
Hello Ben, Guys,
As promised I took some photographs of the rear mounted parting off tool post whilst parting off some 25 mm silver steel bar. There are pictures of the tip of the parting off blade and the swarf produced. This was parted by hand as can be seen from the rings on the face of the workpiece still in the chuck.
Sorry I forgot to take pictures of the bearing support bolts that I was making. If I remember I'll do that on Saturday.Best Regards:
BaronJ.
Similar Threads
-
parting off... or should I say ..how to break the parting off tool
By eskimo in forum METALWORK FORUMReplies: 19Last Post: 19th March 2014, 02:29 PM -
On parting and rear mounted parting tools
By Michael G in forum METALWORK FORUMReplies: 8Last Post: 20th October 2012, 03:17 AM -
Parting tool mounted on rear tool post advice needed
By colbra in forum METALWORK FORUMReplies: 17Last Post: 12th February 2012, 02:49 PM -
rear toolpost ..how ?
By morrisman in forum METALWORK FORUMReplies: 6Last Post: 7th November 2011, 08:05 PM