Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Removing tables from HM52 mill
-
8th April 2018, 02:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
Removing tables from HM52 mill
The Y axis on my Hafpos HM52 has suddenly decided to become almost impossibly stiff to wind back and forth. I can't see anything obvious, gib screws are still in place and tight, I'm thinking that chip has worked its way somewhere it shouldn't be so I'll remove the tables and investigate.
It shouldn't be too hard, start from the top and burrow down, but if someone can share a few words of wisdom it will be appreciated.
Read the full thread at metalworkforums.com...
-
8th April 2018 02:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
CNC kit for HM52 mill?
By jhovel in forum CNC MachinesReplies: 2Last Post: 12th April 2012, 01:36 AM -
Removing mill scale?
By Mathuranatha in forum WELDINGReplies: 1Last Post: 19th December 2010, 12:50 PM -
HM52 CNC Conversion
By RayG in forum METALWORK FORUMReplies: 182Last Post: 16th November 2010, 09:03 PM -
Removing Mill Motor
By electrosteam in forum METALWORK FORUMReplies: 7Last Post: 10th July 2010, 09:54 AM -
S/h hm52
By Dave J in forum METALWORK FORUMReplies: 0Last Post: 23rd April 2010, 06:35 PM