Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Rethreading stub axle.
-
8th October 2018, 05:21 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,423
Rethreading stub axle.
I am rebuilding a 1959 Morgan and the one of the front stub axles has the thread stripped.
It is 5/8 BSF currently.
I am thinking of filing it to its root dia which should be about 13.55mm.
Retapping it Metric 14 x 1.5mm.
A chart on the net shows a min dia for this at 13.73mm.
Any thoughts on this.
A new one would be about $1k. as its part of the sliding pillar suspension.
H.
Read the full thread at metalworkforums.com...
-
8th October 2018 05:21 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Rethreading and repairing a scrap muzzle loader.
By aametalmaster in forum GUNSMITHINGReplies: 4Last Post: 25th September 2014, 07:36 PM -
Slimline Seal Stub ID
By Burnsy in forum TRAILERS & OTHER FABRICATED STUFFReplies: 2Last Post: 29th October 2013, 08:47 PM -
Stub axle welding procedure
By gallegos in forum TRAILERS & OTHER FABRICATED STUFFReplies: 2Last Post: 27th September 2013, 09:34 PM -
Stub axles and using RHS for the axle
By surfin in forum TRAILERS & OTHER FABRICATED STUFFReplies: 9Last Post: 3rd July 2010, 12:58 PM