Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: rusty gym weights - any advice?
-
30th April 2010, 12:52 PM #1Intermediate Member
- Join Date
- Mar 2006
- Location
- australia
- Posts
- 46
rusty gym weights - any advice?
We are trying to set up a home weights gym on a tight budget. We've had some barbell weights donated but many are quite rusty to the point that when handled with bare hands they cut the skin up a bit. I was thinking of getting some WD40 and steel wool onto them but not sure if this is the way to go or if they are even salvageable.
Does anyone have any advice on how to clean them up, whether to bother with them and whether I should seal them somehow if I do manage to get them cleaned up?
Cheers
-
30th April 2010 12:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th April 2010, 01:09 PM #2Intermediate Member
- Join Date
- Oct 2009
- Location
- Hoppers Crossing VIC
- Age
- 48
- Posts
- 26
If your on a budget, you could probably start with a wire brush on a small angle grinder, it should get the rust out.
-
30th April 2010, 01:49 PM #3Awaiting Email Confirmation
- Join Date
- Feb 2008
- Location
- Peakhurst
- Age
- 67
- Posts
- 1,173
You could also use a wire brush on a drill. After that spray them with a clear lacquer.
-
30th April 2010, 01:59 PM #4Dave J Guest
If they have rusted through the chrome theres no bringing them back. I would suggest wrapping them with some electrical tape, in a color of your choice.
Dave
-
30th April 2010, 03:04 PM #5Senior Member
- Join Date
- Aug 2009
- Location
- Quindanning, WA
- Posts
- 175
Have a look at these links or google 'electrolytic rust removal'
Electrolytic Rust Removal
Electrolytic Rust Removal aka Magic
I used this method extensively when restoring an old tractor a few years ago... works great and is dead cheap. The rust doesn't just fall off but it does turn black and soften up so you can easily wire brush it off. I think it works by the fact that the hydrogen evolved at the piece changes the composition of the rust. The only disclamer I would make would to be careful if you are worried about hydrogen embrittlement even though it is most likely a very remote risk.
-
30th April 2010, 03:32 PM #6
Major panic from this forum has a good insight into electrolysis on his website HERE
Easy to follow explanation to the process. I have used this method and it is very successful and cheap to set up. Just click through the slide showReality is no background music.
Cheers John
-
30th April 2010, 03:38 PM #7
-
30th April 2010, 04:59 PM #8Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Yeah, wot Dave said.
But instead of electrical tape there's some self-sticking silicone tape used for repairs by outback 4WD folks and it looks shmick. Prob found at Repco or Supercheap.
If this appeals I'll go digging through my pile of mags one of which has the proper name.Cheers, Ern
-
30th April 2010, 05:36 PM #9Dave J Guest
My son told me, there is some stuff they wrap on tennis racket handles as well. Not sure what it is or how much it costs though. You don't want to end up spending more than what they cost new.
Rereading your post, if it's the actual weights that are rusty, use the wire brush/ wire wheel suggested method above.
Dave
-
30th April 2010, 10:30 PM #10Boilermaker
- Join Date
- Oct 2008
- Location
- Mid North Coast NSW
- Age
- 45
- Posts
- 175
You can buy heat shrink that has a flocked grip on it, it is used for fishing rod handles. Comes in a range of sizes and shrinks to 50% its original size when heated with a heat gun. Spray some adhesive on the bar then slide on and heat.
You'd probably get the bars sandblasted pretty cheaply and is an EXTREMELY effective method of removing rust quickly and entirely.
-
30th April 2010, 10:54 PM #11China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Are they plated if not wire brush , elbow grease and some black enamel paint, if plated angle grinder with wire brush, elbow grease and some black enamel paint
Similar Threads
-
weights
By Tonyz in forum WOODWORK - GENERALReplies: 1Last Post: 12th January 2009, 09:09 PM -
centreboard weights
By rob540 in forum BOAT BUILDING / REPAIRINGReplies: 14Last Post: 27th October 2008, 10:48 AM -
Weights of routers.
By CT in forum ROUTING FORUMReplies: 3Last Post: 15th May 2006, 12:00 AM -
Expensive Paper Weights
By stevepay in forum WOODWORK - GENERALReplies: 4Last Post: 3rd November 2003, 08:58 PM -
saw weights
By poimen in forum HAND TOOLS - POWEREDReplies: 2Last Post: 6th August 2003, 11:01 AM