Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 15 of 15
  1. #1
    Join Date
    Mar 2008
    Location
    Newcastle
    Posts
    326

    Default Fantastic table saw safety photo

    I just saw this photo on the Timbecon website. The add contains the following text:

    "Helps to keep the stock against the fence on router tables and saw benches, etc. Reduces the kickback and chattering. Fits 19mm mitre slots. Used in conjunction with the push stick, it makes for safe and trouble free sawing. "

    I've had a table saw accident but even I'm not stupid enough to put my hands where this goose has his.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    3,402

    Default

    Hmmm, maybe I'd add a blade guard too and drop the blade about 3 inches. Oh, call me Mr Thicky; but with the featherboard in that position won't it press the offcut against the blade causing burning etc? I regularly use a similar device on my Triton but it presses the timber against the fence BEFORE it touches the blade, only the last half inch or so of the plank isn't pressed against the fence.

    I note that the text reads "Used in conjuction with the push stick"; perhaps they are using an artificial limb as a push stick in the photo? I suspect that these would have to be incredibly cheap too as you would only get one or two cuts out of each one

  4. #3
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    3,197

    Default

    Interesting concept - a push stick made of meat.......

  5. #4
    Join Date
    Oct 2009
    Location
    Springfield NSW
    Age
    70
    Posts
    1,007

    Default

    Everything about that is just so, so wrong

    You would think that a supplier of power tools, machinery and accessories such as Timbecon would have a close look before putting it on their website.

  6. #5
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    I dunno what you guys are getting all hot and bothered for, the blade is not moving

  7. #6
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    45
    Posts
    3,316

    Default

    Quote Originally Posted by BobL View Post
    I dunno what you guys are getting all hot and bothered for, the blade is not moving
    He also has another hand as a backup should the worst happen.
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  8. #7
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    62
    Posts
    2,567

    Exclamation What not to do.

    I think this image is wrongly labelled.
    This is the what not to do image.

  9. #8
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    69
    Posts
    2,065

    Default

    Not so long ago the ABC's Gardening Australia featured a bloke who specialised in "recycling" materials you could add to your garden. In the particular episode I am thinking of, he was cutting a piece of timber with a portable powersaw. So... you say.... It looked totally wrong to me for some reason....then I realised he was cutting lefthanded. That is, he had a "normal powersaw (which are righthanded) in his left hand and left his"free hand" (his right one) to be in the way of the approaching saw. It was quite unnerving.
    Just do it!

    Kind regards Rod

  10. #9
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    6,127

    Default

    Darwin Awards honourable mention in 3...2...1...

  11. #10
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    5,773

    Default

    Remember.
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  12. #11
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    5,773

    Default

    Quote Originally Posted by BobL View Post
    I dunno what you guys are getting all hot and bothered for, the blade is not moving
    Perhaps it is a Sawstop table saw

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  13. #12
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    HA! No worse than the big ad I saw for Glock handguns, they had managed to ram the cartridges into the clip backwards.

    Speaking of safety. I was cutting 6mm plexiglas on a table saw, 25cm x 72 tooth blade, maybe up 25mm. Earmuffs & goggles. Chips flying everywhere, felt one hit my forehead, it stung more than the others. Estimated rim speed of the blade 180mph. One of the tungsten carbide teeth.

  14. #13
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    3,197

    Default

    I realise that this is a minor issue compared to the impending loss of fingers ..........but the featherboard is in the wrong position

  15. #14
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    5,773

    Default

    The feather board IS in the wrong position and is wrongly set.
    The handling of the workpiece in the way pictured IS dangreous.
    And the lack of any sort of guard IS dangerous.

    BUT there are plenty of similar pictures in catalogues and magazines.......mostly the pictures are shot by photographers that have absolutly no idea of the work process it the safety issues

    Having the blade fully up for a ripping cut however is correct practice.

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  16. #15
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    83
    Posts
    10,027

    Default

    Maybe the picture should have the caption "Spot this weeks deliberate mistake(s)"
    Reality is no background music.
    Cheers John

Similar Threads

  1. Marri table photo
    By david devine in forum FINISHING
    Replies: 6
    Last Post: 20th June 2011, 10:23 PM
  2. My Dining Table (Photo Thread)
    By Stu Pocknee in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 57
    Last Post: 12th August 2009, 11:26 PM
  3. New Table Saw unboxing (photo thread)
    By Stu Pocknee in forum TABLE SAWS & COMBINATIONS
    Replies: 6
    Last Post: 25th March 2009, 11:14 PM
  4. Replies: 34
    Last Post: 20th March 2007, 09:59 AM
  5. Table Saw Safety
    By NewLou in forum SAFETY
    Replies: 1
    Last Post: 7th June 2005, 07:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •