Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Nanny-state Safety
-
2nd February 2019, 01:41 PM #1New Member
- Join Date
- Oct 2016
- Location
- Sydney
- Posts
- 5
Nanny-state Safety
I guess this is simply a vent. I recently bought a nice shiny new dust extractor and, like most powered tools, it has one of those no-start-til-power-on safety switches. On a dust extractor? Really? So rather than being able to start the machine remotely, I have to wander over and power it up from the machine. And this is for my benefit? Wow!
Anyone have any thoughts about bypassing these devices? It is a Jet DC-1200 and the control box doesn't really want to open... sigh
.. mark.
-
2nd February 2019 01:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd February 2019, 02:04 PM #2
Keeping with the nanny state and the fact people sue........
DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk
-
2nd February 2019, 02:12 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
If you hunt around you will see this topic has been "Done to death" and MANY simple solutions are available
A recent thread on this topic is this one; Remote control on DC-7 dust extractor.
The safety switch is there for a real purpose - check out this post
Remote control on DC-7 dust extractor.
-
2nd February 2019, 02:17 PM #4GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 68
- Posts
- 2,346
Welcome to the forum Mark.
-
2nd February 2019, 02:43 PM #5GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
A simple solution is to simply jamb the start button down. It will then power up as soon as the power comes on.
But keep in mind that on one day in the future that, due to a power failure possibly caused by a faulty power point, you will open the collector to see why it stopped. You might notice some rubbish in the fan blades and as you reach in to remove it, the power comes back on.
-
2nd February 2019, 02:47 PM #6New Member
- Join Date
- Oct 2016
- Location
- Sydney
- Posts
- 5
Thanks, Bob. From a quick search, you have done this a few times, haven't you? )
As I mentioned at the start, more of a rant than anything else. Not the best way to start posting here, but very millennial of me (except I'm older and should know better). So it goes...
All the best!
-
2nd February 2019, 02:47 PM #7New Member
- Join Date
- Oct 2016
- Location
- Sydney
- Posts
- 5
Thank you!
-
2nd February 2019, 02:52 PM #8New Member
- Join Date
- Oct 2016
- Location
- Sydney
- Posts
- 5
Yup. I read that thread BobL posted and the nastiness that can ensue from lack of attention. Then, as woodworkers, a lot of what we do is risk management. Start spinning up a 19mm straight router bit and present it some spotted gum and life can get very interesting very quickly. And then there are all the dangers of using the table saw. For me, the duct collector and its enclosed blade is one of the less dangerous pieces of kit in my shop. I'd put it below the chisels, and knocking stuff off the rafters, but that's me )
Thanks for the replying!
-
2nd February 2019, 02:53 PM #9
If you are turning your DE on just before the dust-making activity, it is too late. If you are turning your DE off as soon as you have finished making dust it is too early.
Turning it on earlier helps get the air flowing into the ports to help catch the invisible dust and leaving it on after helps collect any that did not go in straight away.
The inconvenience of having to walk to the DE can be a good thing by encouraging you to leave it running longer.I got sick of sitting around doing nothing - so I took up meditation.
-
2nd February 2019, 11:36 PM #10
Why not add to the "
We strongly advise contacting a Licensed Tradeperson for all electrical work.
"A person who performs electrical work in Australia must have an electrical work licence authorising the work. Licensed electrical workers are required by law to ensure electrical work is performed in accordance with legislative requirements and any applicable codes of practice and technical standards. "
We have nanny state regulations for a reason, because idiots perform illegal DIY electrical work, illegally modify electrical installations, equipment and build extremely hazardous items such as fractal burners.
Rant over!
Mobyturns
In An Instant Your Life CanChange Forever
-
2nd February 2019, 11:41 PM #11
-
15th February 2019, 05:11 PM #12Senior Member
- Join Date
- Sep 2016
- Location
- Bentleigh East
- Age
- 50
- Posts
- 423
You'd think that people who push sticks against spinning blades with their bare hands for entertainment purposes on a daily basis would know to unplug a machine before sticking their hand in it. Honestly if they don't it's probably best you get them out of there immediately and introduce them to the fascinating hobby of collecting stamps.
Similar Threads
-
Drill Safety Incident / power cord safety
By Arry in forum SAFETYReplies: 9Last Post: 5th October 2010, 02:24 AM -
Nanny / Police state?
By Sebastiaan56 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 21Last Post: 1st February 2010, 09:41 AM -
the best state
By weisyboy in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 52Last Post: 7th April 2008, 07:27 PM -
Safety is NOT just a state of mind...
By Skew ChiDAMN!! in forum SAFETYReplies: 6Last Post: 6th October 2007, 06:46 AM -
State vs State vs Territory... The BIGGEST poll ever.
By Sir Stinkalot in forum POLLSReplies: 33Last Post: 27th August 2003, 10:16 AM