Needs Pictures: 0
Results 1 to 15 of 15
Thread: Buckinghamia
-
27th April 2019, 01:40 PM #1
Buckinghamia
This is a new one for me. Buckinghamiais agenus of only two known species of trees, belonging to the plant familyProteaceae.They grow naturally only (endemic) in therainforests of the wet topic regionof north eastern Queensland, Australia.Theivory curl flower,B. celsissima, is the well known, popular and widely cultivated species in gardens and parks, in eastern and southern mainland Australia, and additionally as street trees north from about Brisbane.received_174781406763294.jpeg
Sent from my SM-G960F using Tapatalk
-
27th April 2019 01:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th April 2019, 01:58 PM #2
Looks like it will make some interesting pens Darren.
I had to google the tree to see what it was, I have seen some of them around Mackay, the flowers confirm it.
I got a few log sections out of the local green waste dump a few years back, after looking at your bits there, I reckon that’s what my bits were. Will have to see if I can find a piece in the shed and have another look.Brad.
-
27th April 2019, 02:10 PM #3
The gentleman that looks after our wood shed at the guild found a heap in the racking but it had bowed in the middle. Faced one edge and face. So I have blanks at 28 and 23 mmm. The ones in the photo come from the sides on the board an was 20mm
Sent from my SM-G960F using Tapatalk
-
28th April 2019, 08:32 AM #4
Medullary detail is neat mate should yield lovely pens,also light coloured timber is interesting.
Peter.Nil Desperandum
-
28th April 2019, 08:58 AM #5
Peter, I spun a bit late last night to see it in the round. The patterning is like that of a grevillia. If not knowing it was Buckinghamia it looks like a locally grown Silky Oak. I like the lighter colour and I don't normally do a BLO finish but will do another piece to see how much change the BLO will make. I will be making a carpenter's pencil for my wood storeman out of it as a thank you
Sent from my SM-G960F using Tapatalk
-
28th April 2019, 09:20 AM #6SENIOR MEMBER
- Join Date
- Feb 2018
- Location
- Shepparton
- Posts
- 508
I stashed some bottle brush [can't spell the real name] it is a beautiful grain timber looks a lot like what you are showing.
-
28th April 2019, 10:41 AM #7GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
We look forward to seeing how this wood turns and finishes bdar.
Buckinghamia wood (also called spotted silky oak) its quite dense, at 930 kg/ m3 and shows these lovely medullary rays in its wood. Like other woods from the enormous Proteaceae family, MANY called “silky oaks". Wood colours density and textures vary but those rays of often a giveaway sign of a Proteaceae wood. They include they Grevilleas, Banksia, Hakea, Cardwellia, Macadamia and Xylomelum - just a handful of genera we see on this forum. There are many other genera.
Thanks for bringing it up and showing us another silky oak bdar.
I stashed some bottle brush [can't spell the real name] it is a beautiful grain timber looks a lot like what you are showing
I don't think there is any similarity mature one between Callistemon (in another family) and the Proteaceae woods. What you will find missing in the bottlebrush wood are the pronounced (oak-like) rays
-
28th April 2019, 10:52 AM #8GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
If Toymaker Len is looking at this post, maybe he can see if this wood (Buckinghamia) is like the small one he sent me to identify.
It looks like it could be to me.
-
28th April 2019, 02:29 PM #9
I found a couple of book matched slabs I cut just after I salvaged the logs out of the dump, they are about 130mm wide each.
I am not convinced its from the same tree, but certainly possible.
There are some bigger bits somewhere.
DSC_9638.jpgBrad.
-
28th April 2019, 10:45 PM #10GOLD MEMBER
- Join Date
- Mar 2003
- Location
- Newcastle
- Age
- 69
- Posts
- 1,075
Thanks for the heads up Euge. The Buckinghamia is much lighter than the Persoonia that I found. I think it looks more like a Hakea with the smaller medullary rays. Big contrast with Ironwoods piece which to me looks exactly like silky oak with a bit of age.
-
28th April 2019, 10:51 PM #11GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
Hi Len
I have some GOOD NEWS which is sent by PM. Just received today from a wood anatomist friend which with the info you provided suggests it is most likely Dillena alata called Red Beech with a red pappery bark... the rays were what led me astray to think it was a Proteaceae. The wood colour (tan) and rays are rather like Buckinghamia ... but then again also a bit different.
addition: One comment I got back Len was that the wood you provided "appears to be sapwood" or immature wood, as the heartwood of the above species is reddish (not tan/pale brown as yours appears to be).
Cheers, Euge
PS (edit) Yes, Persoonia falcata has a deep red heartwood nothing like the wood you had.
SORRY FOLKS, I DID NOT MEAN TO HIJACK THIS THREAD its about BuckinghamiaLast edited by Euge; 29th April 2019 at 10:55 AM. Reason: to make an addition
-
29th April 2019, 09:37 AM #12SENIOR MEMBER
- Join Date
- Feb 2018
- Location
- Shepparton
- Posts
- 508
if I could put up photos I would show the similarity to oak in the tree pieces I have. While I wouldn't differ from Euge but the Callistemon has a lovely oak grain.
-
29th April 2019, 01:08 PM #13
Could very well be. Though it is a lighter colour than some bits of Cardwellia S.O. that I have here.
I always thought it must have been some garden variety Grevillea, but when I saw Bdar’s pics, I thought maybe that’s what my pieces were also, especially due to there being quite a few of those trees in the area.
I can’t be sure either way.Brad.
-
29th April 2019, 03:17 PM #14GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
That's the value of having authentic reference samples from reliable sources eg Forestry or IWCS members. IWCS samples are 150 x 80 x 13 mm. This allows trading and sales between members and at IWCS wood auctions. Mistakes in ID are still made occassionally.
Usually making a small cut with a very sharp knife or razor on end grain of an unknown wood will show features that one can use to compare against a standard reference material. Wood density colour luster odour etc can come into the comparison as much has been published.
Some IWCS members make microscopic sections and mount them as very thin (dyed but transparent) sections onto microscope slides, which they supply to others, and which can be used to make comparison and identification of unknown woods possible. This is another method to compare and identify woods and there are many published wood sections available in digital form that one can access.
Euge
-
1st May 2019, 02:51 AM #15GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 1,557