Needs Pictures: 0
Results 1 to 5 of 5
Thread: BullOak Custom
-
25th March 2019, 09:23 PM #1
BullOak Custom
Well here is MkII of this style, this time I used a piece of BullOak.
I used some 12mm aluminium rod to make the components this time, so the finial cap and the centerband are both 12mm, I also made the lower barrel a bit slimmer.
I shortened the upper tube about 7mm, this looks a bit more in proportion with the Cigar clip. I took the shine off the chrome nib and clip to try and match the aluminium. (I notice the nib still has some shiny patches)
2 coats of CA buffed back with steel wool, and Hutts wax to top it off.
CC welcome, as usual.
DSC_9369.jpg
DSC_9371.jpg
DSC_9373.jpg
DSC_9377.jpg
DSC_9379.jpgBrad.
-
25th March 2019 09:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th March 2019, 10:18 PM #2
Like this one mate,well worth while pursuing.
Regards Peter.Nil Desperandum
-
26th March 2019, 03:09 PM #3
Thanks Peter.
I get a feel there could be a MkIII before I retire this projectBrad.
-
26th March 2019, 03:35 PM #4
I like this one much more than MkI, I’d be happy to own this one.
Cheers
DJ
-
26th March 2019, 03:49 PM #5
Thanks DJ.
I am pretty happy with this one, it feels balanced in the hand and not too heavy.
I would have retired the project on this one, but I am planning MkIII to have a custom nosecone as well.Brad.
Similar Threads
-
Custom
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 0Last Post: 27th May 2016, 09:55 AM -
Buloke/bulloak burl?
By fudo133 in forum TIMBERReplies: 5Last Post: 18th August 2014, 03:20 PM -
Bulloak platter- how I discovered power sanding.
By tea lady in forum WOODTURNING - GENERALReplies: 21Last Post: 29th March 2012, 05:05 PM -
Sheoak / Bulloak Sedona
By mag in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 14th November 2008, 02:52 AM -
Custom Bar
By Pop in training in forum WOODWORK - GENERALReplies: 4Last Post: 1st February 2008, 11:40 PM