Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Finishing pens
-
6th April 2013, 08:50 PM #1
Finishing pens
I put this post on the Finish Forum but didn't get a response, bar one. Therefore I will move it to the pen making forum.
I am after a bit of advice please.
I have been finishing pens with CA but getting a bit sick of the plastic look so I thought I would experiment a bit with finishes.
I am presently trying a Liberon pure Tung Oil finish, slow as it may be. I will apply 4 coats of Tung oil over 4 days with a 0000 steel wool sand in between coats and give it 2 weeks to dry properly - bearing in mind the pen blank timber is very thin after turning.
I saw an earlier post on here where Neil suggested EEE to give the tung oil a final cut after it dries. I will try that too. However, I was thinking about a coat of Carnauba wax at the finishing product to give the timber a shine. Would this be the best way of going about getting a hard finish to the blank so that it is protected against daily pen use?
As I mentioned, I know CA is great but I am after a little more natural yet hard protective finish.
I have also tried one pen with French polish, dried for a week and then a coat of Carnauba wax over the top. I haven't tried it for wear and tear yet although the timber colours came out nice and it has a natural looking gloss on it.
Thanks for any advice or ideas
Greg
-
6th April 2013 08:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th April 2013, 11:36 PM #2
Greg,
Not sure what you are going to find what you are looking for? but as indicated in your previous thread, you will find it very hard to get an oil, wax or polish that will give you a hard protective surface that will last every day use. CA and very few other finishes like poly will give this but you will have to live with the glassy / plastic type finish if you want the hard protective coating.
Not sure that there is too many other options with this one mate.
Cheers
Tony
-
7th April 2013, 02:45 AM #3Turned a Few
- Join Date
- Jul 2008
- Location
- Red Deer, Alberta Canada
- Age
- 77
- Posts
- 1,958
Greg,
If you want a fast, hard, and durable finish in either a gloss, semigloss or satin finish give MINWAX Polyurethane a try.
The nice thing about polyurethane is you can rub down the gloss finish for example, with extra fine steel wool to get a nice warm wood feel.
I use it to finish all my wood pen barrels and works great for me.
https://www.woodworkforums.com/f207/l...method-151717/
Les
-
7th April 2013, 09:14 AM #4GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
+1 for Les's pen dipping method, especially using WOP. Using satin WOP may give you then finish you're after.
-Scott
Similar Threads
-
Nylon bushings for finishing pens
By redturner in forum WOODTURNING - GENERALReplies: 1Last Post: 13th March 2013, 11:22 AM -
finishing aluminium pens
By hobo1507 in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 7th September 2012, 10:50 PM -
Todays Pens & First castings turned to Pens
By Perfect Pens in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 25th January 2012, 03:32 AM -
Finishing it off
By finlay25 in forum WOODTURNING - GENERALReplies: 10Last Post: 19th January 2012, 02:24 PM -
Finishing Pens
By wheelinround in forum WOODTURNING - PEN TURNINGReplies: 8Last Post: 19th November 2009, 08:53 AM