Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Lost bushings
-
28th October 2017, 08:49 PM #1
Lost bushings
Well after being away from my creative zone for over 4 weeks.
I finally got back in there this afternoon after giving my self a five minute refresher course.
Ie that's the lathe that's the bit that turns I think.
I decided I would turn a slim line pen for someone I know.
Well after spending ages looking for bits I swear I had.
The bushings I brought ages ago, I gave up and used the old ones I had.
I got by, but we're the hell are those bushings!.
Now for those that don't know me, or my space.
I would describe my creative zone as moderately organised not OCD, it's small,but I generally like things in there place and empty the bin more than twice a year.
Well anyway I got the job done and I'm fairly happy with my Jarra Crome slim line pen.
So I'm being a good Boy Scout and putting everything way.
The pen mandrel comes of the lathe and I grab the little red plastic slip box if lives in from the bench and low and behold there's the little (expletive) bushings stuffed down in the end of the box.
Lol lol lol well now all the little pen tuning bits and bops will find them selves in there own little bigger clear plastic tub from now on very soon.
Cheers Matt
Sorry no professional editing for me tonight [emoji849]
-
28th October 2017 08:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th October 2017, 09:05 PM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
I've a shelf under my lathe that holds a small chest of drawers that I made for the space. It has 5 drawers, the top drawer, contains my small miniature turning chisels, pencils and bitsnbobs, the next one down holds my Robert Sorby ring tools and other special tools of similar kind, the 3rd drawer holds all my pen making stuff, in it is a bit of ply about 50 mm wide with 6 mm dowels to hold the bushes, the next one down holds screws, coach screws for the face plate and other odds and sods as does the bottom drawer. Can post pics if anyone wants to see it.
KrynTo grow old is mandatory, growing up is optional.
-
28th October 2017, 09:10 PM #3
-
28th October 2017, 09:51 PM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Hi Matt, just went out to get some pics for you. Hopefully they might give someone a few ideas. The shelf on the left hand side, holds my tray for micromeshing the CA finished pens, not that I do much of CA, as I've become allergic to the stuff.
DSCF0484.jpg
DSCF0485.jpg
DSCF0486.jpg
DSCF0487.jpg
DSCF0488.jpg
DSCF0489.jpg
My biggest problem is forgetting to close the drawers, hence the wood shavings and dust in the drawers.
Drawers are made from 9 mm MDF with 3 mm bottom, approx 200 wide 350 deep and about 50 mm deep each.
KrynTo grow old is mandatory, growing up is optional.
-
28th October 2017, 10:16 PM #5
Kyrn
Bloody hell mate you didn't have to run out right now.
But I do appreciate it big time.
I do like your little tray for all your bushings,there's food for thought in there.
Big thumbs up [emoji106][emoji106]
Cheers Matt
-
28th October 2017, 10:23 PM #6
Hi Matt,
Firstly nice pen. Grain really stands out.
I also went out and took some photos of my setup. Lathe came with bench attached. I built and installed the 3 drawers below the bench top and installed a Mr Strong vice and a 6 inch bench grinder ($29 Ozito).
Vice was bought at Brisbane Wood show 10-15 years ago. Grinder was just too cheap to pass. Not ideal but good enough to get me started. Keeps things sharp enough to turn the pens I showed in another thread.IMG_0188.jpgIMG_0189.jpg
Not tidy but workable until we get our own place.
-
28th October 2017, 10:27 PM #7GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
I know I didn't have to, but if I didn't do it straight away I'd forget, which is happening a lot lately, it's called CRAFT disease, Can't Remember A Flamin Thing.
I found that the big drawers get loaded up with unnecessary crap, which is why I kept them small, even then, they still fill with crap, but not as much!!!!
krynTo grow old is mandatory, growing up is optional.
-
28th October 2017, 10:49 PM #8
The whole draw thing has got me thinking
I report back in a few years time with my own take on it.
Thanks guys
Similar Threads
-
Bushings
By cookie48 in forum WOODTURNING - PEN TURNINGReplies: 12Last Post: 21st November 2013, 09:10 PM -
Pen bushings
By redturner in forum WOODTURNING - PEN TURNINGReplies: 7Last Post: 21st February 2012, 04:31 PM -
Pen Bushings
By Dorno in forum PEN TYPES & INSTRUCTIONSReplies: 6Last Post: 16th July 2009, 08:18 AM -
Bushings
By schaf in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 10th December 2007, 08:13 PM