Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: New Pen Display
-
10th November 2009, 11:30 PM #1
New Pen Display
Hey There,
Further to Texx's post on Pen Display, I said that I needed a Lockable display case for an prospective sales outlet, I contacted my mate the Plastic Guy, and sort of said what I needed and my Mate and his Son come up with a proto type, It was clear and not very good to look at, you couldn't define any pens and everthing was lost in the background, # 2 proto type is pictured and we have already refined a few aspects and will have # 3 out next week. This one displays 10 (ten) pens and is only accessible from the rear. Refinements will be, rounded corners instead of chamfered, and rounded ends of the top of the sides and bottom of legs/feet. We have also decided that the latch plate needs to be White. At this stage the measurements are (Roughly) 360 wide x 250 deep and 250 high, the tray is about 50mm deep.
I am going to put an infill in the bottom that will have my name and contact details, # 3 might also have provision for Business cards
I think that this will work for a galley or retail outlet, where you have consignment stock, but I will be making something similar to Texx's for markets and displays (if I go there)It's Hard to Kick Goals, When the Ba^$%##ds Keep moving the Goal Posts.
Check out my Website www.harrybutlerdesigns.com.au
-
10th November 2009 11:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th November 2009, 03:58 AM #2Turned a Few
- Join Date
- Jul 2008
- Location
- Red Deer, Alberta Canada
- Age
- 77
- Posts
- 1,958
Very nicely done!
Looks great and very effective display.
Les
-
11th November 2009, 08:18 AM #3
Hi HazzaB
Were you and your mate looking at marketing them? I for one wood be interested if they were cheap enough to compete the the Chinese onesCheers
Glenn
-
11th November 2009, 08:49 AM #4Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
That's a good display Hazza. Nice joint effort.
-
11th November 2009, 09:16 AM #5
Very nice
Cheers Rum Pig
It is easier to ask for forgiveness than permission.
-
11th November 2009, 09:31 AM #6
Well done, looks great. Its a pity the latch can't be "hidden" somehow as it detracts from the overall design of the display. Nevertheless, a nice piece of work.
Reality is no background music.
Cheers John
-
11th November 2009, 08:12 PM #7GOLD MEMBER
- Join Date
- Sep 2008
- Location
- texas, queensland
- Posts
- 1,239
G,day just butting in a bit here , i had a thought if you are going to make some cases along the lines of the one i made and you are going to use them for transporting here and there, grab some foam rubber from some where the right thickness to be a nice snug fit when the lid is shut to stop the pens bouncing all over the show while in transit ,
-
11th November 2009, 08:28 PM #8
Looks good Harry so when do I get one?
Davidgiveitagoturning @hotmail.com
-
11th November 2009, 08:31 PM #9
Hey Texx,
Not a bad Idea, i have a few of the Pen Cases from David at timber bits, they have a little laccy band that holds them in place (Sometimes) I was trying to think of a way of stopping them trying to breed, when I am taking them to show people. A piece of 6 or 8 mm low density foam would be just the shot.
Getting back to my Proto Type # 3 I was going to see if the Space at the bottom could be smaller and we have an arrangement at the top that held a Header/ Label detailing the Maker etc. that covered the latch jigger, I will see my Man early next week and get some thoughts, he says that if I can draw it he can make it, (He's a brave man)
HazzaB
Just talked to my Man and have suggested that we put a Business card holder above the Latch to cover it, will do some trials and post the results, in the next couple of days. Am also going to paint the latch and see if that helps.Last edited by HazzaB; 12th November 2009 at 10:14 AM. Reason: added info,
It's Hard to Kick Goals, When the Ba^$%##ds Keep moving the Goal Posts.
Check out my Website www.harrybutlerdesigns.com.au
Similar Threads
-
display
By texx in forum WOODTURNING - PEN TURNINGReplies: 21Last Post: 11th November 2009, 10:34 AM -
Pen display box PC
By arose62 in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 9th October 2009, 01:20 PM -
A display box
By Vonveska in forum BOX MAKINGReplies: 10Last Post: 27th May 2009, 10:29 PM -
Pen Display
By JTTHECLOCKMAN in forum WOODTURNING - PEN TURNINGReplies: 20Last Post: 9th April 2009, 08:42 PM -
Pen Display Box
By Jiminidaho in forum BOX MAKINGReplies: 1Last Post: 31st December 2007, 08:22 AM