Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
-
3rd March 2012, 04:49 PM #1SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- Gold Coast
- Age
- 63
- Posts
- 847
Pen turning requirements - what are they ?
I want to start pen turning. I usually do bowls and lidded boxes but ocassionally find myself doing spindle work.
But I plan to make a yr 12 graduation gift for my daughter. So what pen turning gear do I need to get started ? I've read some of the threads here and looked up various instructions (well some are only partially read so far) but haven't seen a list of the basic tools and gadgets required.
Any comments appreciated.
-
3rd March 2012 04:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd March 2012, 05:35 PM #2GOLD MEMBER
- Join Date
- Aug 2007
- Location
- Brisbane
- Posts
- 1,156
Basic tools assuming you already have a lathe and basic tools (roughing gouge, skew etc)
You need a pen mandrel, pen kit, appropriate bushings for your pen kit. Appropriate drill bits for your pen kit (along with a drill press, and some way of holding the blank as close to dead vertical as possible in the drill press). You will need some way of squaring off the ends of the blank to the tube inside. I use a pen mill. Pen mills are normally sized to suit a 7mm tube, so if you are using a larger one then you may need to make a sleeve so that the mill will fit your tube. Some people use an appropriate mandrel on a disk sander instead of a pen mill. You also need standard things like adhesive, various grades of sandpaper, and finish (I use CA glue). Be aware that the pen kits come in various different metal platings, and some are more durable than others. You need somew way to cut the blanks in half, and trim the ends close to length once the tube is glued in. I use a bandsaw, but before I got that I used a small gentleman's saw. I would suggest you practise a few before doing a nice graduation present, because you will inevitably make some mistakes to learn from.The other day I described to my daughter how to find something in the garage by saying "It's right near my big saw". A few minutes later she came back to ask: "Do you mean the black one, the green one, or the blue one?".
-
3rd March 2012, 07:48 PM #3
Hey Daddler,
You're on the Gold Coast, go and see Gawdelpus and just buy one, You already have the cheapest necessity " The Lathe", pen turning will develop into a monster Beleive me. Enough silly stuff.
TimberBits (Forum Sponsor) has all the gear, Tools and kits plus books and instructions,
Gary Pye, (Forum Sponsor) is just up the road, go and see him, I think that there are Pen Turners in the Shop that could help you.
Carrolls Wood turning Supplies (Forum Sponsor) has heaps of gear, and a Starter Kit that looks interesting.
Or just ask questions here you will get a few answers in no time.
HazzaBIt's Hard to Kick Goals, When the Ba^$%##ds Keep moving the Goal Posts.
Check out my Website www.harrybutlerdesigns.com.au
-
3rd March 2012, 07:49 PM #4
Hi Dabbler
The list is pretty endless , so it depends on what your interests are. You are welcome to come around my place and see many many tools and gadgets, I make a pretty good coffee too . Be warned though, it is a woodturner's bachelor pad, run by a wood addict that will chew your ear off
PM me if interested.
CheersNeil____________________________________________Every day presents an opportunity to learn something new
-
3rd March 2012, 10:18 PM #5
hey dabler
as mentioned the lathe is the cheapest thing when turning to the dark side ( pen turning ) trust me as we all know its a bottomless pit for your funds
but its sooooo good
-
4th March 2012, 12:15 AM #6
Hey Dabbler. Best advise is to watch & learn from David (Timberbits) instructional video's. Step 1 to step 9. Link Videos - Pen Kits, Pen blanks, Clock Kits and wood turning accessories.
I never forget anything I remember !!
-
5th March 2012, 06:58 PM #7SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- Gold Coast
- Age
- 63
- Posts
- 847
A big thanks to everyone who has replied, or PM'd or both. I still have to reply to a couple of PM's and invites. Hopefully I'll be able to catch up in person with some locals and see your pen-work in real life.
I visited GPW today and picked up some pen tools, assorted blanks, cheaper kits and some general turning supplies. It was difficult but I only *looked* at the Jet gear and managed to avoid buying anything with a motor! Mind you - I still had to delve into my hidden cash supply. Next time I'll probably buy on-line.
I already had a fair idea of the basic needs from checking this forum and visiting the recommended websites before starting this thread but your collective first hand advice has really helped. Thanks again.
dabbler
-
5th March 2012, 07:06 PM #8
just ask a question at any time even if you think its a silly one , ... we have all had that moment at one time or another you will always get a answer
-
5th March 2012, 10:49 PM #9
dabbler
i am with Troy
your back account will be afraid, very afraid
Tony
-
6th March 2012, 05:13 PM #10
Hi Dabbler.
It was great to meet you yesterday, please feel free to drop in any time , we have lots of guys who like to look and touch all the goodies before they buy.Cheers Huon
Largest range of Dayacom pen parts in the southern hemisphere.
Why pay more? When the best costs less! www.garypye.com
-
6th March 2012, 05:40 PM #11
-
6th March 2012, 08:38 PM #12
Requirements for pen turning.
Step 1 - mortgage house...
But seriously I agree with all that has been said. Gary is great for supply, and there are plenty of people down your way who know what they're doing and will be able to help you I'm sure. Also use YouTube. Lots of good demos on there."That's impossible. Nobody can give more than 100%. By definition that is the most anyone can give"
-
6th March 2012, 10:23 PM #13SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- Gold Coast
- Age
- 63
- Posts
- 847
All this talk of over-spending is starting to worry me. Just about all of you have told me this is going to break the budget. I've already started eyeing acrylics and wondering about how they'll look when turned. So I can see the reasoning behind the advice.
When I fitted my jacob's chuck to my mortiser I discovered it didn't have a large enough stroke to drill pen blanks. I ended up doing a couple of blanks with a power drill guided by a temporary alignment jig but now I'm trying to decide if I can easily hide a dedicated drill press.
Maybe I'll just buy extra blanks instead.
-
6th March 2012, 10:42 PM #14
If you have a 4 jaw chuck for your wood lathe you can drill quite successfully in that , keep the speed down to discourage heat ,put a drip tray under the work and use a squirt bottle of water to help the cooling and lubrication of the drilling , I am not sure what a mortiser is but there are a few different ways to drill long holes with short movements ,a hand drill can be used on one of those cheap drill press adapters you see around from time to time ( I got one at aldis a while back) The price of the addiction is not that bad as long as you stick to the basics ,stay away from casting (that's a separate addiction ) lol. Cheers ~ John
G'day all !Enjoy your stay !!!
-
7th March 2012, 05:19 PM #15
You can buy ready made presses for attaching a hand drill to. I used to use a Bosch one when I started. Not sure on price but it would be a fraction of a stand alone. They won't do a huge travel but enough for most pens.
"That's impossible. Nobody can give more than 100%. By definition that is the most anyone can give"
Similar Threads
-
power requirements for 2hp motor
By benskyring in forum METALWORK FORUMReplies: 16Last Post: 25th November 2009, 01:41 PM -
requirements for a 15a circuit
By 19brendan81 in forum WELDINGReplies: 63Last Post: 6th June 2009, 11:36 PM -
Dowel plate requirements
By Woodwould in forum METALWORK FORUMReplies: 1Last Post: 22nd March 2009, 01:17 PM -
Broadband Requirements !
By 351shaker in forum COMPUTERSReplies: 3Last Post: 14th September 2007, 09:16 PM