Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: Starting from scratch
-
16th March 2015, 08:47 AM #1Senior Member
- Join Date
- Aug 2014
- Location
- Gold Coast
- Posts
- 135
Starting from scratch
G'day
What equiptment do you suggest I would need to get started making pens ?
If I have to buy everything in the equiptment list on most sites it will be game over / too expensive !
I am thinking a lathe like W305 or MC1018
but what else is necessary ?
and what is just in the nice to have area?
And re the lathes I have not seem much of interest in the used market recently so if you know of anything in SE Qld area pm me
Garry
-
16th March 2015 08:47 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th March 2015, 09:56 AM #2
The very basics you need are:
A spindle gouge or chisel that that you feel comfortable with.
A pen mandrel
7mm drill for basic pen kits. Other sizes for all the other variations
Endmill for squaring up the ends after gluing in the brass sleeve. This can also be done on a disc sander if necessary.
A live centre for the tailstock or a mandrel saver
Glue - either CA or a 2 part epoxy
Coarse sandpaper to roughen up the sleeves so the glue will stick properly
Some way of pressing the kits together. That could be the lathe tailstock, pedestal drill, vice, or a dedicated pen press.
These items will get a pen made but you will always find many other items down the track that you will want to make life easier, but not essential.
Remember when you glue the sleeves in the blanks that you need to get ALL the glue out that may have crept inside the brass sleeve, otherwise you will most likely crack your wood or resin when you press the components together.
The addiction takes hold very quickly so be careful.Dallas
-
22nd March 2015, 08:24 AM #3
Treecycle has pretty much nailed it as a starting point.
-
22nd March 2015, 08:33 AM #4
You may also need someway of sharping your turning chisels a bench grinder is these easeiest.
-
14th April 2015, 08:49 PM #5Senior Member
- Join Date
- Aug 2014
- Location
- Gold Coast
- Posts
- 135
Lathe bought
G'day
Progress has been made
I found a secondhand lathe in as new condition
A GPW Midi Lathe Variable Speed Inverter Drive
incl Axminster 8 low speed grinder
lots of chisels
Vicmark chuck
2 more sets of jaws
sanding gear
some pen making stuff
bench
drill chuck
Now for a few more questions
Most of the chisels incl. are big
What do you use on pens
which CA glue is best for finishing ?
Is CA glue or epoxy best for gluing tubes
I have been told to start with the 7mm slimline pens as they are easier
but I wish to move the the fatter pens as soon as possible
which ones are easiest for beginners ? and which to leave as too hard?
I also have to decide which way to use for blank drilling
and pressing , any hints ?
-
14th April 2015, 10:05 PM #6Senior Member
- Join Date
- Aug 2012
- Location
- Banora point,NSW.
- Posts
- 172
Starting help!
Mate,
PM me, tangoman, I live just south of you at Banora Point. You might like to pop down for a chat and a turning session.
Regards,
Cam
-
15th April 2015, 08:31 AM #7
-
15th April 2015, 06:17 PM #8Senior Member
- Join Date
- Aug 2014
- Location
- Gold Coast
- Posts
- 135
-
15th April 2015, 06:22 PM #9Senior Member
- Join Date
- Aug 2014
- Location
- Gold Coast
- Posts
- 135
Thanks for that info, I have now got those items you mention ;
one further thing I need to sort is a way of pressing them together , Would my drill press or lathe do the job ?
I have spent all I can for now so maybe later a pen press but for now need to try using what I have got
-
15th April 2015, 08:08 PM #10
I press my pens together with the woodworking vice on my bench. I have also used a metalworking vice.
I think with a bit of thought you could use the tailstock on your lathe to press your pens together.
I have a GPW midi, it's a good lathe for pen turning, it should serve you well.
I would recommend two part epoxy for gluing in the tubes, give the CA a miss, it is prone to problems. I use the 15-30 minute epoxy, you can get it at a reasonable price from both GPW, and Timberbits, no doubt others sell it too.Brad.
-
15th April 2015, 10:33 PM #11
-
17th April 2015, 05:55 PM #12
As others have mention unless you are in a real hurry stay away from CA to glue in the brass tube. I use epoxy and leave it over night to cure. I was using the 5 minute one but if you have a fair amount of tubes to do then it is better for a longer work time.
As for finish I use wipe on poly and I leave it overnight before applying another coat. As you can guess it can take a while to complete 5 coats. During summer I might be able to put on two coats with about 12 hours between coats.
I take them inside the house to dry, much less dust.
-
17th April 2015, 06:36 PM #13Senior Member
- Join Date
- May 2013
- Location
- South west vic
- Posts
- 343
As "Christos" has mentioned don't use CA for glue ups, more trouble than its worth.
l use the Polyurethane glue from the "green" shed - http://www.bunnings.com.au/sikabond-...sive-_p1660985
There is a bigger bottle, but l think shelf life is 6 months or so after opening, the great advantage is it expands as it cures - creating a nice tight bond, watch out it doesn't push out the brass tube as it cures/sets/expands.
Stevo
Similar Threads
-
starting from scratch on my rural block
By jasons673 in forum MY RURAL BLOCKReplies: 62Last Post: 29th November 2011, 12:51 PM -
Scratch Awl
By sjm in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 18th July 2011, 09:33 PM -
built in wardrobe - starting from scratch
By andrew29 in forum WOODWORK - GENERALReplies: 18Last Post: 13th July 2009, 04:52 AM -
starting from scratch on a rural block
By jasons673 in forum MY RURAL BLOCKReplies: 20Last Post: 21st April 2009, 01:45 AM -
Starting From Scratch with $1500
By Hoppoz in forum ROUTING FORUMReplies: 25Last Post: 2nd February 2007, 09:26 PM