Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
-
13th July 2006, 09:28 AM #1
LS System DVD on the way, available soon.
Hi,
Those who have seen the Incra Original Jig promo DVD appreciate how apt the saying 'a picture is worth a 1000 words' is!! In 7 minutes it shows what would take hours to explain.
Incra have just finished a similar DVD on their flagship LS Positioning System, our copies are on the way, once it arrives we will burn it onto the same disk as the Original and make it available to prospective purchasers. This way you will be able to see the differences between the two jigs. Drop us a note if you would like a copy.
incra woodworksupplies com auput the @ and the ..'s in (we left them out in an attempt to avoid SPAM)
Within a few months the LS systems will be supplied with a full 1 hour Instructional DVD, we will supply this FOC to all our recent LS system purchasers, Incra a finalising this DVD now and we will keep you updated as to its progress.
Regards
The Woodworker
-
13th July 2006 09:28 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th July 2006, 01:49 PM #2
LS System 1 hour DVD
For those of us that have been chasing an LS DVD and DVD versions of the current video productions for nearly two years, that is great news. However I doubt we could now be called "recent purchasers' so can you give any indication of the cost?
Cheers,
-
17th July 2006, 06:39 PM #3
Not sure yet????
Originally Posted by graemecarson
The DVD is likely to be about the same as the 'Original Instructional DVD' circa $29 -30.
We're really excited about the demo DVD, it is reported to be really good. The demonstrator Perry McDaniel (author of the Incra Projects & Techniques book) really know his stuff.
Regards
The Woodworker
-
17th July 2006, 09:39 PM #4
I'll be very interested when they arrive - anything to convince me BTW - hope the book of Incra Projects & Techniques arrives in that shipment!!
"Clear, Ease Springs"
www.Stu's Shed.com
-
18th July 2006, 12:07 PM #5
Instructional DVD
Incra's demonstration stuff is always excellent from the explanation/demonstration point of view. What excites me is that the DVD quality and new technologies in video production should make the picture quality on their new stuff as good as the content quality instead of the older NTSC picture quality.
It should be well worth the wait.
cheers.
-
19th July 2006, 06:32 PM #6
DVD's now available
[QUOTE=Gwhat]Hi,
Incra have just finished a similar DVD on their flagship LS Positioning System, our copies are on the way, once it arrives we will burn it onto the same disk as the Original and make it available to prospective purchasers. This way you will be able to see the differences between the two jigs. Drop us a note if you would like a copy.
incra woodworksupplies com auput the @ and the ..'s in (we left them out in an attempt to avoid SPAM)
We received the DVD yesterday and have compiled it into a DVD covering the Incra LS POsitioner, The 'Original' Incra Jig, Incra Rules and Incra Mitre Gauges we've also added in the DVD on Hock Blades, all up about 37 minutes. Follow the instructions above if you'd like a copy.
Regards
The Woodworker
-
21st July 2006, 08:28 PM #7
I only ordered mine yesterday and it arrived today. Thanks Grahame, I'll be in touch soon.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
24th July 2006, 02:42 PM #8
Looks very impressive for those who haven't seen it. Worth checking out, but be prepared to be seriously tempted.
"Clear, Ease Springs"
www.Stu's Shed.com
-
24th July 2006, 04:37 PM #9
I have just purchased a SE1000 mitre jig from Graham, who was very helpful and welcoming. I felt that I could not come all the way to Melbourne without buying at least something , can't wait to get back to my table saw and start fiddling with it as soon as we have finished doing the rounds of the rellies... I will post my experiences with the jig in due course.
-
24th July 2006, 06:59 PM #10Originally Posted by workgoose
I have one of those, and you'll love it
-
24th July 2006, 11:00 PM #11
G'day Auld, I'm sure that I will like it, I have heard a lot of good things about it... cheers Peter
-
3rd October 2006, 11:30 AM #12
It's finished....YIPPEE!!!!!
Hi all
Advice from Texas this morning, the LS system instructional DVD is finished and they're posting the first copies tonight (our time) and they will include our bulk order with a shipment leaving Dallas on Wednesday.
The DVD has a run time of 82 minutes and was shot in Chris Taylor (Incra's President) own workshop. It is a great tool to make sure that we all get the maximum benefit from our investments in LS positioners.
The cost will be $33.50 incl. postage. Recent purchasers will get it FOC.
Our 37 minute promo DVD is still available free to anyone interested in being tempted into the Incra club.
Just drop us a line sales woodworksupplies com au (just put the ..'s @ in first) if you'd like one.
Regards
The Woodworker
-
3rd October 2006, 11:59 AM #13
-
4th October 2006, 02:41 PM #14
Ls Dvd
Hear, Hear, Hear, Hear.........
-
4th October 2006, 02:55 PM #15
Yeah baby!!!!
Similar Threads
-
New Metal Spinning DVD
By metal spinning in forum METALWORK FORUMReplies: 2Last Post: 5th December 2008, 11:25 PM -
simplex hot water system
By pjreno in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 0Last Post: 13th April 2006, 05:31 PM -
IT advice about making CD or DVD
By echnidna in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 6Last Post: 10th March 2006, 03:16 PM -
Japanese Triton training DVD
By TritonJapan in forum TRITON / GMCReplies: 9Last Post: 9th November 2005, 09:42 PM -
Gripper DVD
By Landseka in forum HAND TOOLS - POWEREDReplies: 14Last Post: 18th March 2005, 08:25 PM