Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Replacement 1000SE
-
26th July 2005, 08:27 AM #1
Replacement 1000SE
I recently purchased a 1000SE Mitre Guage from Woodcraft in the states.
It was faulty in that the fence extension did not align with the fence and pushed the whole thing out of square.
I emailed Woodcraft and they asked me to send it back to them for replacement.
I then emailed them again saying that I was not happy to pay the postage for a return item.
They have now sent me a new guage (not recieved yet but hopefully this one is okay), and said I can keep the other one.
The faulty one should be okay with the extension fence removed.
It looks like I will now have two 1000SE's (almost) for the price of one, I will keep the one without the extension fence for band sawing or other tasks.
Just a little gloat
Oh yeah, and appreciation of good customer service, I will have no hesitation dealing with Woodcraft in the future.
Thanks to Gwhat (the Woodpecker) for your offer to help me if I had no luck from Woodcraft
Jack."There is no dark side of the moon really. Matter of fact it's all dark."
-
26th July 2005 08:27 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th July 2005, 07:58 AM #2
Extension Fences Available
Originally Posted by Jack E
We have a few Incra Telescoping Flip Fences on order (27" to 49" range) this will effectively give you the same fence as is std on the 3000se, @ $115, you've really got a great mitre gauge.
Regards
The Woodpecker
www.woodpeckers.com.au
-
27th July 2005, 09:01 AM #3
Thanks for the tip,
Is it possiblae to buy metric replacements for the measuring tape on the fence?
Cheers, Jack"There is no dark side of the moon really. Matter of fact it's all dark."
-
30th July 2005, 07:55 AM #4
Tapes & Racks needed
Originally Posted by Jack E
We have a few Metric scales available, 0 - 430mm reading Right to Left. However, to use Metric with fences etc featuring the Incra sawtooth rack system, you also have to replace the racks. Otherwise, you will never be able to lock the stop at a specific metric dimension as the existing racks will lock it to the closest Imperial dimension.
The Metric racks are also available, it is a matter of just counting up how many you need and adding 1 for the stop.
E-mail us at [email protected] and we will give you antmore info you need.
Regards
The Woodpecker
www.woodpeckers.com.au
-
30th July 2005, 08:10 AM #5
Thanks Gwhat,
That was me who ordered 9 racks and 3 scales to modify my 1 and a bit 1000 SE's the other day
Gotta be quick fellas
Jack"There is no dark side of the moon really. Matter of fact it's all dark."
-
1st August 2005, 11:12 PM #6
Gwhat,
Tell me more about the metric racks. Presumably they are in 1mm increments? Not .5mm increments? If I were to buy a TSIII fence how many would I need to convert this to metric and what would the approximate cost be?
-
2nd August 2005, 01:04 PM #7Originally Posted by markharrison
The racks are 1/2 mm increments, to upgrade a TS-III would be somewhere between $30 & $50 as I'm not sure how many racks are in it. With the metric scales you will have to suffer multiples of 0 - 430mm scales in the medium term, within 6 mths both 0 - 430 & 430 - 860 will be available.
When you ready email us at [email protected] and we will work out a metric deal (base unit + metric upgrade).
Regards
The Woodpecker
www.woodpeckers.com.au
-
2nd August 2005, 08:36 PM #8Originally Posted by Gwhat
CheersThe Numbat is a small striped marsupial whose whole diet consists of termites.
-
3rd August 2005, 07:30 AM #9Originally Posted by numbat
- Incra have run out of Metric scales, until their next major print run in approx 6 months (they print in batches of Millions of scales at a time)
We bought the last of the Metric scales they had in stock (a whole 20 or so!!!) and they are 0 - 430mm reading Right to Left.
Incra have agreed to print both 0 - 430mm scales and 430 - 860mm scales in the next print run, therefore users of positioners, particularly table saw fences with greater than 16" range will need to make do with 2 x 0 - 430mm scales until then.
We have plenty of Green (metric) racks that work with all but the LS range of positioners, as well as having a few Quik Draw blank templates, for those wishing to set-up metric dovetailing / box joint templates.
I hope that that all made sense.
Regards
The Woodpecker
www.woodpeckers.com.au
- Incra have run out of Metric scales, until their next major print run in approx 6 months (they print in batches of Millions of scales at a time)
-
3rd August 2005, 09:44 AM #10
Yes that made sense - thanks very much for the clarification.
CheersThe Numbat is a small striped marsupial whose whole diet consists of termites.
-
9th August 2005, 02:27 PM #11Originally Posted by Gwhat
Similar Threads
-
Sandpaper replacement
By Wassy in forum TRITON / GMCReplies: 7Last Post: 2nd August 2005, 11:40 PM -
Replacement Table Saw Fence
By mag in forum TABLE SAWS & COMBINATIONSReplies: 6Last Post: 7th October 2004, 05:57 AM -
Replacement handles - hand planes
By Driver in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 23rd March 2004, 10:02 PM -
Inca planner/thicknesser replacement blades
By electraguru in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 30th January 2004, 07:26 AM -
Lancelot Woodcarving Disc & Replacement chains
By Peter Cera in forum ANNOUNCEMENTSReplies: 3Last Post: 5th July 1999, 09:21 AM