Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    47
    Posts
    1,484

    Default BARAP roof trusses

    Hi all

    Does anyone know what BARAP roof trusses are? I'm looking at a house that has this kind of roof construction. I vaguely understand the construction of a normal cut roof, but I have never heard of this kind of structure before.

    My second question is then about the load bearing characteristics of the roof. If it is a truss, does that mean that the internal walls are not loadbearing?

    Thanks

    Trav

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2004
    Location
    eastern suburbs, melbourne
    Posts
    598

    Default

    I suggest you search on google for barrup truss.

    I think it uses cables.
    no-one said on their death bed I wish I spent more time in the office!

  4. #3
    Join Date
    Apr 2004
    Location
    eastern suburbs, melbourne
    Posts
    598

    Default

    Barrup Trusses

    Each beam running perpendicular to the trusses includes a barrup truss which is made up of a strut and cable made of cast-iron on the underside. This works by placing the cables in tension, causing the strut to be in compression and creating an upward force in the middle of the beam, in effect creating a extra support in the centre of the beam. This enables a minimal section beam to span further or a beam section to be reduced for the same span.
    no-one said on their death bed I wish I spent more time in the office!

  5. #4
    Join Date
    Aug 2003
    Location
    .
    Posts
    10,482

    Default

    Quote Originally Posted by jackiew
    Barrup Trusses

    Each beam running perpendicular to the trusses includes a barrup truss which is made up of a strut and cable made of cast-iron on the underside. This works by placing the cables in tension, causing the strut to be in compression and creating an upward force in the middle of the beam, in effect creating a extra support in the centre of the beam. This enables a minimal section beam to span further or a beam section to be reduced for the same span.
    You cheated, and cut and pasted that from some where.

    Al

  6. #5
    Join Date
    Aug 2003
    Location
    .
    Posts
    10,482

    Default

    Most roofs with a barrups in them will be the old stick built type ( built on site ), so there will be some internal walls that are load bearing.


    Al

  7. #6
    Join Date
    Sep 2003
    Location
    Kyabram Vic
    Posts
    83

    Default

    Barrups or bressumers were commonly used in a traditional cut and pitched roof where the floor plan was designed with no consideration for supporting the roof. (No wall conveniently located to carry a prop to an underpurlin.)

    With the advent of customers wanting large living/family/kitchen areas, it was often necessary to beef up some of the main roof members. Usually the underpurlins and the hip rafters.

    Lower pitched roofs were also becoming common and there was often insufficient space to fit a heavy strutting beam.

    Barreps have become relatively rare now, because of the extensive use of factory manufactured roof trusses.

    If you look in your roof space you should be able to figure out where the greatest roof loads are concentrated. Take great care if you are thinking of altering a section of wall carying heaps of load. (Especially if you have a tiled roof.)
    Ian

  8. #7
    Join Date
    Apr 2004
    Location
    eastern suburbs, melbourne
    Posts
    598

    Default

    Quote Originally Posted by ozwinner
    You cheated, and cut and pasted that from some where.

    Al
    i don't believe in re-inventing the wheel ok I should have quoted my source ( except I'll probably never find it again )
    no-one said on their death bed I wish I spent more time in the office!

  9. #8
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    47
    Posts
    1,484

    Default

    thanks all. Moral to this story is to get up in the roof and have a look

    Have a good weekend.

    Trav

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •