Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2004
    Location
    Sydney
    Posts
    1

    Red face victorian profile timber weatherboard - advice please

    We will be constructing a small conservatory type addition to the rear of our house. Council has specified that we should use Victorian profile timber weatherboards.

    Can anyone provide advice on the difference between Victorian style weatherboards and regular weatherboards and where these can be obtained in Sydney?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    1,879

    Default

    I feel certain they will be referring to SQUARE EDGED Baltic Pine Weatherboards, available from any timber place.

    "early" Victorian homes did have another profile of board with what's known as a Regency Bead on the outer edge, but I would be surprised if council knew what they were and were requiring those.

    AFTER the VIC era there were a range of weatherboard variations available, most common of which was the round-edge or bull-nose weatherboard. These were intro'd well after the Victorian Era and proliferated in the 40's-60's.

    If you can, please send a pic of you place and a pic of the plans for the conservatory as I would love to see what youre planning ..... also, have you referred to the English magazines as a reference for conservatory designs? The UK is the land of the conservatory, as the attached will attest to. The English House and Garden, and similar magazines are full of ads like this one .... of course, it is MUCH colder there and a glass roof'd conservatory may not be what youre planning at all



    Have fun!
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  4. #3
    Join Date
    Jun 2004
    Location
    Grafton, N.S.W.
    Age
    63
    Posts
    1,330

    Default

    G'day.
    If you have a sample of the weatherboard, you could have the required amount machined for you.
    I know that Danias Timber in Victoria Road at Marrickville can produce any profile out of a large selection of different species.
    Hooroo.
    Regards, Trevor
    Grafton
    Last edited by glock40sw; 2nd December 2004 at 11:17 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •