![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Likes](https://www.woodworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: f17 or mgp 10
-
18th April 2007, 06:12 PM #1
Novice
- Join Date
- Sep 2006
- Location
- melbourne
- Posts
- 11
f17 or mgp 10
I have to replace existing ceiling joists,I was going to use 90x45 KD does anyone out there think I would be ok using 90x45 pine.The span is 3.6
-
18th April 2007 06:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th April 2007, 08:01 PM #2
I think you'll need a hanging beam whichever way you go on those dimensions.
TM
-
6th May 2007, 10:11 AM #3
If you're replacing them due to sag, I'd go with a hyspan or similar - having said that, (and I may be way off) you could marry these into the existing joists I guess and reduce the impact on the ceiling (though i suspect there is no ceiling left at the moment!)
Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
6th May 2007, 08:15 PM #4
Senior Member
- Join Date
- Jun 2003
- Location
- brisbane
- Posts
- 253
Hi
Are they continuous spans or single spans, what centres are they.
MPG 10 900 centres single span 140x35
f17 900 centres single span 120x 45
hope this helps
Similar Threads
-
Is KD F17 OK for table top?
By Rob from Kew in forum WOODWORK - GENERALReplies: 11Last Post: 22nd April 2005, 12:40 PM