Thread: Nail length and finish

Hi

I've come accross a document from one of the timber companies that says bright nails are fine for H2 and LOSP. My only issue now is 75mm or 90mm for 45mm framing, I'm leaning toward 90 but they are a lot more expensive

bright nails are fine, 75mm nails are OK if you use 35mm top and bottom plates. 2 nails per stud.

cheers
pulse

As Pulse said.
It's interesting that the 'nominal' fixing of plates to studs is 2/75mm nails for 35m plates & 2/90mm nails for 45mm plates. [through the plate - not if skew nailing]
Nail gun fixing aside how many chippies use 90mm nails & how many inspectors check.

I know 75mm is allowable but I always use 90mm as they grip far better.
They are dearer but in the overall cost of things it really equates to a trifling amount

I only ever use 75mm, because they're only nominal fixings and the 12mm or 16mm threaded rod running from roof batten to bearer @ 1200 crs or less will pull it all together anyway (cyclonic area).

Mick

don,t listen to mick - he's got shares in the company

Hi Guys

Thanks for all the replies, I will go 90 I think, are they more prone to splitting? Or do you have to be a bit more accurate? My top and bottom plates are 90x45.

- Trenches are all done - concrete next weekend!