Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 12 of 12

Thread: Redgum stumps

  1. #1
    Join Date
    Apr 2004
    Location
    Melbourne Footscray
    Age
    58
    Posts
    61

    Default Redgum stumps

    Hi - I had my house restumped with redgum 10 years ago and already there are signs of sinking. I was told that the stumps and sole plates are probably rotting because the redgum they used was from young redgum trees where years ago it came from 150year old trees and wouldn't rot for 50 years once in the ground. Can anyone shed some light on this?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    45
    Posts
    3,318

    Default

    MMMM .... I see the problem .... the best answer would be to restump with concrete and turn many pens, pepper grinders and bowls to pay for the change over.

    Oh sorry just saw that you were a first poster ...... please wait for a sensible answer ... most likely from journeyman Mick
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  4. #3
    Join Date
    Nov 2003
    Location
    Beachport, South Oz, the best little town on the planet.
    Age
    72
    Posts
    1,675

    Default

    Neddy, our odiferous friend may have thought he was being funny but he is dead right, your stumps will rot. How fast depends on many things, the timber used, your soil type, the moisture available, the ventilation or lack of...... etc. etc. if possible restump with concrete.

  5. #4
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    62
    Posts
    5,639

    Default

    Personally I prefer steel stumps set in concrete. Lighter, easier, faster and more termite resistant. Termites hate building galleries on steel but will build them on concrete, or possibly in the concrete if it is not placed properly and has voids in it. Can't help you with how long stumps are meant to last, I've only ever pulled timber stumps out and replaced them with steel or concrete. Ten years sounds too short though, do you have good drainage away from the house? Water ponding under or around the house or downpipes discharging on the ground around the house will cause stumps to sink very quickly.

    Mick

  6. #5
    Join Date
    Apr 2004
    Location
    Melbourne Footscray
    Age
    58
    Posts
    61

    Default

    Thanks fella's...............

  7. #6
    Join Date
    Sep 2003
    Location
    Kyabram Vic
    Posts
    83

    Default

    Neddy, 10 years is pretty soon to be seeing the effects of rot for redgum stumps.

    You didn't mention when you first noticed the sinking.

    If this has just become obvious in the last couple of years it could actually be long term shrinkage of the clay foundation because of the low rainfall.

    I notice you live in Footscray. The clay soils in your area are notoriously very highly reactive to moisture change.

    100mm to 150mm heave at surface level is not unusual.

    Before you condemn the stumps it may be worth digging down beside one to assess whether it really is rotting. Also check out the sole plate.
    Ian

  8. #7
    Join Date
    Jan 2004
    Location
    Over there a bit
    Age
    17
    Posts
    2,511

    Default

    Everybody charge yer flame throwers, You'll probably need them to shoot me down in flames, but,

    Were they red gum?

    and,

    What sort of red gum?
    Boring signature time again!

  9. #8
    Join Date
    Jan 2005
    Location
    St Helena
    Age
    62
    Posts
    1

    Talking

    I've registered just to get a couple of answers concerning stumping.
    Firstly, what are those jacks called used to prop up your house when re-stumping and secondly, can you buy or hire them?
    Thanks

  10. #9
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    1,879

    Default

    Hi all

    Living in Footscray may be the problem as its notorious for movement, being clay. It may not be the stumps' problem is what I am saying. Go to council and ask one of the engineers if they have a soil report for the area, explaining what your issue is - they may give it to you.
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  11. #10
    Join Date
    Jun 2003
    Location
    Melbourne
    Posts
    1,091

    Default

    If you re-stump with concrete, and the stumps are not rotted (I doubt they would be after 10 years), and no insects have had a go at them (which I also doubt); you will have lots of redgum to work into something else. If you are going to burn it, please email me, I will take it off your hands!

    I'm in Newport, not far down the road, and in a house with 15 year old redgum stumps. They were not rotting and doing just fine, but it was a shame the last stumper dug them down 400mm into 2000mm of uncontrolled fill. So guess what, the stumps are just fine, but the house dropped 150mm or more. Whilst excavating out the 2000mm to 4000mm of fill (soil, plaster, asbestos, dead chickens, bluestone, bed frame, pushbike) from under the house, I found the original, possibly 100 year old) redgum sole plates about 3000mm down. Not the best condition, but still intact.

  12. #11
    Join Date
    Dec 2004
    Location
    Bendigo
    Posts
    28

    Default

    Hi Mick
    Where do you buy your steel stumps from. I had a look at the uni-pier but they want $70 a stump. Hoping you know of a cheaper alternative as I like the idea of using steel not at that price though

    Regards

    Bear

  13. #12
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    62
    Posts
    5,639

    Default

    Bear,
    I usually make them myself. Depending on the application I'll either make them in black steel and have them hot dipped or make them in supa-gal or duragal. I shoot some levels first and work out the required lengths. I usually make them in increments of 100mm. A piece of 75 x 6mm flat bar or 100 x 75 x 6 angle on top and one or two pieces of Y12 (reo rod) on the bottom.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •