Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Operator's manual
-
21st April 2008, 01:23 PM #1Novice
- Join Date
- Apr 2008
- Location
- Sydney
- Age
- 34
- Posts
- 17
Operator's manual
Does an operator's manual have to be provided with an emergency, warning and intercommunication system control panel?
-
21st April 2008 01:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
22nd April 2008, 12:26 AM #2
Yes, no and maybe. Perhaps if you tell us why you want to know, more helpful information might be forthcoming.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
22nd April 2008, 12:32 PM #3Novice
- Join Date
- Apr 2008
- Location
- Sydney
- Age
- 34
- Posts
- 17
It's for a tafe building assignment, were studying like medium-high rise buildings.
-
22nd April 2008, 01:27 PM #4Member
- Join Date
- Feb 2008
- Location
- Sydney
- Posts
- 66
Is it, that you have been shirking your studying time? surely If you are doing a Tafe course, all the information needed for assignments etc, would be available.
-
22nd April 2008, 01:33 PM #5
You say "does a manual have to be provided..." , what do you mean? A commercial builder who hands over a building to a client with a building occupant warning system in it (fire and evacuation alarm, intercom etc) would normally provide a manual for the building with information about all the equipment in it. I dont believe there is any legal requirement to hand over a manual though.
Young kids cancels shed time
-
22nd April 2008, 03:42 PM #6Senior Member
- Join Date
- Jun 2007
- Location
- In a House
- Posts
- 353
I'm not too sure about a manual.. we recently installed Lightning Protection on a high rise and we had to supply compliance certificates outlining we were meeting and exceeding the building codes and regulations but a manual not!!
Similar Threads
-
Uni Jig Manual
By Toasty in forum WOODTURNING - GENERALReplies: 8Last Post: 18th September 2018, 09:58 AM -
Stihl 076 CS Manual
By West OZ Mark in forum SMALL TIMBER MILLINGReplies: 5Last Post: 18th March 2008, 11:35 PM -
looking for manual
By PDB in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 10th January 2008, 02:31 PM -
Record 405 manual
By Clinton1 in forum HAND TOOLS - UNPOWEREDReplies: 0Last Post: 18th January 2006, 02:38 PM