Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2006
    Location
    Brunswick
    Posts
    132

    Default Plumbing Regulations - Hot water service distance from window?

    One for the plumbers.
    What is the regulation in Victoria regarding how far a HWS must be from a window? Am getting a gas storage unit for outside. I was thinking the reg's was 500mm from a window, not sure if this is from an openable window or any fixed window? The spot I hope it can go is also near where the drainage pipes for the kitchen sink and laundry go to. It would be near this, but not covering it or restricting access to these pipes.
    Otherwise will have to go where I was hoping to put my rainwater tank!!!
    Cheers
    McBlurter

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    620

    Default

    500 below eaves
    1000mm from gas meter
    <150mj/h 500mm from window
    >150mj/h 1500mm from window
    150mm from drain pipes.
    500mm from any building.

    Are you going to do it yourself or get it done by a plumber?

    There are other rules you need to know if you want to do it yourself.

    You on lpg or nat?
    If you dont play it, it's not an instrument!

  4. #3
    Join Date
    Jul 2006
    Location
    Brunswick
    Posts
    132

    Default

    Thanks Bricks
    Will use the builders plumber but he suggested we put it in another area, so I just wanted to check if it could go where I want it to before I start saying to him where I really want it to go! From what you have said it should be able to go where I want it, hopefully the plumber will agree.
    Cheers
    McBlurter

  5. #4
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    620

    Default

    The plumber may know best as to system performance, price, ect.

    Having said that if your hell bent on putting it where you want it there are other considerations to factor in.

    -distance to taps,
    -distance to water and gas sources
    -ease of installation
    -fences, boundarys, walkways
    -ease of service

    -heaps of other environmental reasons.


    Be prepared to pay extra for it. most guys are on a strict budget with builders so it might cost a bit- maybe even $500 - 1000. depending on the situation.
    If you dont play it, it's not an instrument!

Similar Threads

  1. Solar hot water
    By ozwinner in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 12
    Last Post: 19th March 2008, 08:47 AM
  2. hot water system
    By Gaynor in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 19
    Last Post: 1st August 2004, 06:47 PM
  3. changing tap washers on hot water taps
    By jackiew in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 85
    Last Post: 6th May 2004, 06:43 PM
  4. Hot water system questions
    By Arron in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 6
    Last Post: 22nd December 2003, 11:00 PM
  5. Replies: 17
    Last Post: 12th July 2003, 10:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •