Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
29th April 2013, 10:51 PM #1
I am a Woodturning Addict in the Making
Hello Woodturners
I have a few questions,
Question 1: I was watching turning videos on you tube and the Guy doing the demo spoke of types of skews , How many different types of skew are there?
Question 2: what is the difference between a spindle gouge and a bowl gouge?
Question 3: Is three days an excessive amount of time to make one chisel handle
Gerard
-
29th April 2013 10:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th April 2013, 11:00 PM #2Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
-
30th April 2013, 11:07 AM #3Senior Member
- Join Date
- Dec 2008
- Location
- Clarence Town
- Age
- 70
- Posts
- 217
Hi Sheetmetal,
's advice is about as good as you will get. He is a professional/production turner
will be doing a demo at the Woodturners of the Hunter the first weekend in June (1st and 2nd). The first day will be a demo with the Sunday dedicated to beginning and/or inexperienced turners. May well be worth a trip up the F3 for you.
If you send me a pm I can give you more info, as we have not started advertising yet - still recovering from organising Rolly Munro last Satrurday.
My only other advice is to join a local woodturning club - I wish I'd done that when I started (it would have saved me lots of mistakes on lathe and tool purchases). The Sydney Woodturners Guild would be a good place to find your local club.
Cheers, and happy turning,
Paul
-
2nd May 2013, 09:05 PM #4
Thank You
Thank You and Wood Nut
I had always intended to join a club, in fact I intend to contact Southern Districts Woodturning at Como. Not sure if I got the name right but I do know that they are affiliated with Sydney Woodturning Guild.
Wood Nut I will PM you re the Hunter event.
thanks again
Gerard
-
3rd May 2013, 09:47 AM #5SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Normanhurst NSW 2076
- Age
- 82
- Posts
- 484
woodturning
Hello sheetmetal,
I wont make any comments on your secific questions, because of the quality of the advice already given.
However, as to learning, I think that you should join a club where you can do practical work under some guidance
and help. I also strongly recommend that you undertake a course. I suggest you contact Trend Timbers (MULGRAVE) and do the learner's course with John Ewart,
a very experienced professional turner. I have no commercial interest. But many many years ago, I did all the courses with him (6 modules) and more
and that gave me a solid base to go ahead. Hope that helps. Drillit.
-
3rd May 2013, 10:51 AM #6Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
G'day Sheetmetal!! Good to see you joining the shavings and sawdust sniffers union!
As for Skew Chisels it's much as says, but just a few pointers:
*Try to get skews with rounded rather than square edges. They are much easier to manage when rolling beads.
*There is an Oval Skew available. Avoid it!
*Some turners like to round the end of their chisels. I have found this to be a good thing, especially when starting out.
Similar Threads
-
Auction addict
By snowyskiesau in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 2nd October 2008, 05:43 PM -
another addict maybe
By tikiland in forum FESTOOL FORUMReplies: 2Last Post: 17th November 2007, 10:43 AM -
A new addict
By ozwinner in forum WOOD WHISPERING WOMENReplies: 14Last Post: 9th April 2007, 05:00 PM -
Yes I am an Addict
By Froggie40 in forum WOODTURNING - PEN TURNINGReplies: 0Last Post: 12th September 2006, 02:07 AM