Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
3rd November 2017, 10:09 PM #1GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,809
Making some bookmaking tools for my artist wife
My artist wife paints, makes artist's prints and artist's books. The latter require intricate stitching through either the ends of the artwork 'pages' or through attached paper hinge pieces. The commercially available awls are pretty boring items so I decided to turn her some of my own design. I obtained some HSS stainless rod 2 mm diameter for the working part. This one I used a scrap of Grey Mangrove that I had. The Grey Mangrove is a protected species but I was lucky enough to get some small pieces that were legally removed for some council works (permit numbers etc. obtained). Grey Mangrove has a beautiful grey-violet colour to the timber, which seems to last. This piece had some fungal attack that removed the grey and turned it brown, so it is two-tone. It is about 150 mm long, finished with EEE Ultrashine and Shellawax Glow.
Grey Mangrove awl 7.JPG
-
3rd November 2017 10:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th November 2017, 10:05 AM #2GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,809
Another one
This one is a very different, and rather odd, design out of my imagination. It is turned from Crows Ash with a little spalting (timber obtained from Mapleman a couple of years ago) and a piece of recycled/reused copper pipe ferrule (it was a bit beaten up). The larger, stubby handle and longer pin allow it to be pushed through more layers of paper - but I'm not really sure how well it will work. The 2 mm SS HSS pin is very stiff so it may work.
Crows Ash awl a.JPG
-
6th November 2017, 10:26 AM #3
Was the Crow's Ash difficult to turn David?...MM
Mapleman
-
6th November 2017, 11:25 AM #4GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,809
No Chris, it is easy to turn, even for a novice turner like me. I have also turned another handle from a larger awl I made for myself. I gave some to IanW for his threaded wooden screws and he said it turned well and worked well as a screw too - the timber is apparently a little 'greasy' (though I haven't noticed that characteristic). It takes a finish of shellac or Shellawax glow well. I'll take a photo of the awl I made for myself and post it later.
-
6th November 2017, 11:31 AM #5
Thanks for that David
Not sure if you knew but the Crow's Ash came from the Anglican church garden in Kilcoy...MMMapleman
-
6th November 2017, 03:54 PM #6GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,809
Thanks Chris,
I knew that it was a 'rescue wood' tree but not the exact location. It's good to know the provenaqnce.
David
Similar Threads
-
Making do with old tools?
By chook in forum HAND TOOLS - UNPOWEREDReplies: 37Last Post: 11th January 2016, 07:41 PM -
Making your own tools.
By scorpio_oz in forum WOODTURNING - GENERALReplies: 21Last Post: 13th November 2009, 10:24 AM -
Making tools
By littlebuddha in forum WOODTURNING - GENERALReplies: 12Last Post: 14th May 2008, 11:01 PM -
Making some of your own hand tools
By Grahame Collins in forum WELDINGReplies: 20Last Post: 5th February 2008, 06:32 PM -
Making your own tools
By rsser in forum WOODTURNING - GENERALReplies: 1Last Post: 11th November 2002, 12:59 PM