Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 22
Thread: changing hands
-
5th March 2017, 02:01 AM #1Novice
- Join Date
- Nov 2016
- Location
- Collie, Western Australia
- Age
- 74
- Posts
- 11
changing hands
I am new to woodturning, 3-4 months, and still learning. One thing I am fairly confident about though is the skew chisel. I noted that most of the turners in our woodturning group are wary of the skew chisel, don't use it much, and they warned me to be careful of it. Therefore, I was a bit intimidated by the skew and determined to master it and overcome that fear. I have done a lot of research on the skew, watched many youTube videos over and over again, practised heaps, suffered many catches, finally enjoyed some degree of success, and now it is my favourite tool.
One thing I picked up frpm watching Curtis Buchanan videos and Jake Gevorgian, was that they change hands when traversing the work from right to left, and then left to right. I've watched all of Jake's videos and he always changes hands when reversing direction - sometimes several times when cutting one cove or bead. Curtis said he was one handed for 20 years before he discovered the benefits of changing hands, and has been changing hands ever since (about 7 years).
I decided to train myself to change hands with all tools, and being new to woodturning, decided to get into good habits while I was learning - so, I always change hands, even though it is not always completely comfortable to do so.
But! - is it a good habit? Is it the right thing to learn?
I note that many of the world's top woodturners do not change hands and do everything with their right hand on the handle and left hand on the chisel and tool rest (or the opposite for left-handers).
Before I totally commit to one way or the other I would appreciate your advice on this matter.
The reasons I think changing hands might be a good thing to persevere with include:
- in time it will become muscle memory, comfortable, and automatic, like learning to use the clutch when learning to drive a car and changing gears with the left hand (in Australia, that is)
- it seems to make sense to me that by changing hands you are doing things exactly the same way, whichever direction your are travelling in (eg rolling your wrist inwards when turning a bead - not inwards when doing the left side and outwards when doing the right side)
- when I am rolling a bead at the extreme end of the spindle, I am further away from the head-stock and rotating chuck, rather than being in contact with one or other of them
- visibility is improved when turning beads and coves.
The down side of learning to be ambidextrous is that one suffers many more catches when learning to use the non-dominant hand, but this situation is improving.
There is not much about this on the Internet, so I would really appreciate the input of experienced woodturners in this group.
Many thanks, James
-
5th March 2017 02:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
5th March 2017, 02:18 AM #2GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
James,
Yes to all of the above. Also by changing back and forth you are spreading the strain on sets of muscles and can turn longer without cramping or fatigue, which leads to catches.
Being able to work both left and right handed also extends to sawing, drilling, and hammering. Quite handy if you are at the top of a ladder trying to get something done that is on the opposite side of your dominant hand.So much timber, so little time.
Paul
-
5th March 2017, 02:40 AM #3Member
- Join Date
- Sep 2008
- Location
- Richards Bay
- Age
- 74
- Posts
- 78
Its a great habit to cultivate, especially when you reverse a blank (after turning the outside) to hollow out the inside, then it is easier to touchup the outside left handed . especially with the pull cut. you automatically cut downhill then.
-
5th March 2017, 02:44 AM #4Novice
- Join Date
- Nov 2016
- Location
- Collie, Western Australia
- Age
- 74
- Posts
- 11
-
5th March 2017, 02:45 AM #5Novice
- Join Date
- Nov 2016
- Location
- Collie, Western Australia
- Age
- 74
- Posts
- 11
-
5th March 2017, 10:01 AM #6GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
Yes to what Paul said. I have a lot of trouble with the large platters and flared bowls I make with the edge moving after reversal. So i cut and finish the edges and rim on the 1st chucking. Once you master left and right hand with the tools, it will feel natural. It was easier for me as I had to learn to weld left handed as you cant always get you body in the correct position. Keep practicing.
Rgds,
Crocy.
-
5th March 2017, 10:20 AM #7
There is no hard and fast rule regarding hand positions and movement. In this stage you are now, with all this being new, its time to experiment and try all sorts of methods and adopt what is comfortable for you. The main thing is to work safely. Not putting you or the job into danger.
I have been "fiddling" with the wood lathe for 30 odd years but I have to rethink what I am doing from time to time mainly because I am not on the lathe continuously. Its gives a lot of pleasure when you create something that has gone smoothly with the process.
Bottom line.....practice, practice, practiceJust do it!
Kind regards Rod
-
5th March 2017, 01:31 PM #8
I have never found the need to be ambidexterous while working on the lathe. I occasionally turn left handed but only when teaching a left hander.
-
5th March 2017, 03:59 PM #9
When turning symmetric pieces such as balls, it's very convenient to use the left hand toward the headstock work, because there's no easy place to stand with the headstock in the way when using the right hand. Being ambidextrous is also beneficial in billiards for some awkward shots.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
5th March 2017, 04:17 PM #10
The Leftie.
Hi James,
Well, I'm a Leftie, but do need to Turn Right handed to do a Bowl or similar.
That is very rare for me, as I don't normally Turn Bowls.
To do a few things that only my right hand can do.
I have approx 13 Skews, so you can guess what is my Favoured Tool.
I think, seeing how you have made progress will both hands, why not keep at it.
You can only get better. The more you turn the better you will get.Regards,
issatree.
Have Lathe, Wood Travel.
-
5th March 2017, 07:31 PM #11Novice
- Join Date
- Nov 2016
- Location
- Collie, Western Australia
- Age
- 74
- Posts
- 11
-
5th March 2017, 08:28 PM #12GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 1,240
I did the nsw tafe woodturning course and our teacher said there wasn't any left handers he had taught. .
I personally don't change hands and at the end of my apprenticeship could turn 28 to 35 newel posts a day a post being 90 by 90 and 1.5 long.
There would be 500 to 600 mm of turning and a ball on the top.
If you step along there doesn't seem to be a need to change hands.Turning round since 1992
-
7th March 2017, 09:18 PM #13Intermediate Member
- Join Date
- Dec 2016
- Location
- Adelaide, Australia
- Posts
- 34
For spindle turning a relevant question is why turn with left hand forward when the chuck is on the left? Surely safer and better visually to do right hand forward. I was taught that way and I like being comfortable with both. Perhaps bowl turning throws that though.
-
9th March 2017, 07:22 PM #14
I turn with both hands,with skew or gouges,once learned y,ou do it unconsciously and find that the workflow is smoother.It does take practice but well worth it.Skews are no different or difficult to master.
Sent from my iPad using TapatalkScotty Heilander
-
10th March 2017, 08:19 PM #15SENIOR MEMBER
- Join Date
- Jan 2012
- Location
- Rockhampton CQ
- Posts
- 120
This whole handedness thing has me a bit flummoxed. I am right handed, so my go to hand on the lathe is with the right hand on the handle and the left up at the tool rest. From what you have said, this is in the majority. Yet, when I use other precision wood working instruments like an axe or adze, my left hand is on the distant part of the handle and my right is up near the head. I always thought this was right handed. So what gives - the guiding hand is near the action isn't it, and this is the "handedness"?
For some silly bloody reason, I use my left hand to guide a crowbar, shovel, broom and mop, yet the right hand up near a pick head.
All good fun.
Alister.
Similar Threads
-
HANDS on dvd
By pmcgee in forum HAND TOOLS - UNPOWEREDReplies: 1Last Post: 11th December 2015, 09:17 AM -
I have in my hands
By DocBug in forum WELDINGReplies: 3Last Post: 9th September 2014, 05:39 PM -
Hands off
By underfoot in forum WOODCARVING AND SCULPTUREReplies: 133Last Post: 29th January 2012, 07:40 AM -
Need clock hands with rabbit on hands
By kitsol in forum CLOCKSReplies: 3Last Post: 30th August 2009, 10:40 PM