Thread: Egg Timer Holders

Originally Posted by Woodchuck2

Off-centre eggtimer holder plans/instructions. Does anyone know where I can get hold of same?

Try Egg Timer

Thanks for that, a nice design, will make a few. Phil

What he said

Thanks, Sprog for jogging my memory!
I have sourced Ray Hopper's "Multi-Centre Woodturning"
from the library where I originally saw the idea some years ago.
Like Pommyphil I'll now give it a burl.

Buy the glass bit first.I notice the ones Jim sells are a different size and the plans would need to be modified.
Ted

Yes The plans are for 14mmX81mm The ones I have ( from Jim ) are 29mm X 95mm

Big difference, to scale it up would not work. Back to the drawing board. Phil

Originally Posted by pommyphil

Yes The plans are for 14mmX81mm The ones I have ( from Jim ) are 29mm X 95mm

Big difference, to scale it up would not work. Back to the drawing board. Phil

you should be able to scale it up!

Yes, but it might look a bit chunky, at least 15mm thicker alters the proportions heaps.

I'll play around with it, luckily not commercial so time is free. Gentlemen turners.