Needs Pictures: 0
Results 1 to 14 of 14
-
24th October 2016, 04:19 PM #1Intermediate Member
- Join Date
- Jul 2014
- Location
- Brisbane, Australia
- Age
- 42
- Posts
- 36
My Grandfather's Segmented Woodturning.
Hi All,
I hope it's okay to post a video in here, I'm hoping I'm safe in the General Turning forum.
Anyway, here is a YouTube link to some of my late Grandfather's work that I thought needed sharing.
https://www.youtube.com/watch?v=DN78OwhAZQM
Cheers,
Dan.
-
24th October 2016 04:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th October 2016, 04:28 PM #2
Some very nice pieces there, well worth a look.
JimSometimes in the daily challenges that life gives us, we miss what is really important...
-
24th October 2016, 08:13 PM #3
Segmented woodturners must be the most patient people in the world
Cheers smiife
-
31st October 2016, 09:01 PM #4Intermediate Member
- Join Date
- Jul 2014
- Location
- Brisbane, Australia
- Age
- 42
- Posts
- 36
Thanks Jim, I thought so too...
Smiife, there are stories of him setting alarms at 2am so that he could get up and get the next pieces glued and clamped. Need to maximise all the time we have I guess.
-
31st October 2016, 11:05 PM #5
-
1st November 2016, 11:32 AM #6GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
I am most impressed with the shapes and design of the progressions of the segments. I have not seen anything like them before. I am still doing "round and brown" and have not yet explored all the possibilities of crazy grain, spalted timber, and partially rotted stumps.
I very much admire segmented turnings, but at age 77 may not get to doing them.
Your grandfather was an artist and craftsman. Thanks for posting the video.So much timber, so little time.
Paul
-
1st November 2016, 05:54 PM #7GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Very inspiring!
Thanks for posting Meldge.
Did your grandad ever sell any of his pieces, or was it more a thing he did for pure pleasure?
-
8th November 2016, 09:38 AM #8Intermediate Member
- Join Date
- Jul 2014
- Location
- Brisbane, Australia
- Age
- 42
- Posts
- 36
Thanks for the kind words Paul39, it's never to late to start. You are already turning, next it's just cutting and gluing before turning...
Start simple with some strips and no fancy designs.
Hi artful bodger, as far as I am aware nothing was ever sold. The collection is still complete minus the few that he gifted out.
I find it all very inspiring as well, I hope to attempt something of similar style one day.
-
8th November 2016, 08:24 PM #9GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Go and get yourself a lathe at once Meldge, might just be in your blood.
Your grandads bits kick bottoms!. Some very original ideas going on there.
Thanks for posting.
-
9th November 2016, 09:19 AM #10Intermediate Member
- Join Date
- Jul 2014
- Location
- Brisbane, Australia
- Age
- 42
- Posts
- 36
I have a little MC900 and some tools. No sharpening setup yet though so no more turning until that is sorted.
I had never used one before but I jumped in and tried it out, so far I have done:
Spinning top for my 1st born
Captive ring rattle for the newborn
Bud vase for the wife
Two more bud vases
A turning still to be finished that I hope to make look like a water pourer
A bud vase for my mum
A small bowl.
Fingers crossed that there is more to come, redesigning the garage \ 'shop' at the moment.
-
9th November 2016, 10:10 AM #11SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Normanhurst NSW 2076
- Age
- 81
- Posts
- 484
Hello Dan,
You are no doubt very proud. They are beautiful.
Thank, you for sharing with us. I will look at them again
to-day and try to get some inspiration for unsegmented pieces. Thank you. Drillit.
-
9th November 2016, 08:39 PM #12Member
- Join Date
- Apr 2008
- Location
- Currumbin Valley, Qld
- Posts
- 89
Fantastic work, thanks for sharing.
-
19th November 2016, 11:46 AM #13
Sensational work, and a great legacy.
Don't Just Do It.... Do It HardenFast!!
Regards - Wayne
-
21st November 2016, 07:55 AM #14
Jim, that's a bit of an understatement.
Very interesting and exceptional joinery techniques, some of which I have no idea how he has accomplished the effect as there are no tell tale joinery lines to give any clues. The one thing that has me most impressed is the age of some of the pieces and how the joinery has stood the test of time. the earliest I noticed was 1980 to the video date of 1995, some 15 years for the platter. Many of the pieces do not appear to be hollowed to the wall thicknesses accepted these days but still exceptional work.Mobyturns
In An Instant Your Life CanChange Forever
Similar Threads
-
Grandfather Clock
By Chris Parks in forum CLOCKSReplies: 4Last Post: 10th June 2015, 12:01 PM -
Grandfather clock
By Scottwc in forum CLOCKSReplies: 7Last Post: 14th March 2014, 06:18 AM -
My Grandfather Clock
By EricPringle in forum CLOCKSReplies: 2Last Post: 15th November 2011, 07:44 PM -
Grandfather Clock
By Bill Lindsay in forum CLOCKSReplies: 6Last Post: 5th September 2010, 11:24 AM -
85-year-old grandfather . . .
By WoodJunky in forum WOODIES JOKESReplies: 0Last Post: 7th July 2010, 09:06 PM