Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: HSS Blanks for turning tools
-
27th May 2009, 10:01 PM #1
HSS Blanks for turning tools
Hi everyone. I have been looking around for some new turning chisels and have found the price difference amazing when it comes to buying HSS blanks. Gary Pye and McJing sell blanks very cheap (both claiming to be type M2, which would make them the same as the Sorby, Hamlet etc. tools), butr unning on the old addage of 'if its too good to be true it probably is' with regards to the price of HSS blanks, can anyone tell me if they have any idea if these cheap blanks are any good, given that I am not a professional and they will only receive moderate use.
Thanks in advance
Simon
-
27th May 2009 10:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th May 2009, 10:14 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
I don't know about Gary Pye but the McJing M2 is M2, and if you look around you can find it even cheaper than this. Hardness is not the only factor to assess quality but I have tested its hardness at work and is is as hard as any high quality M2 tool steel. As far as WW is concerned, M2 is working as the very light end of its working ability. M2 was developed as a metal working tool steel design to retain its hardness at high temperature. If a cheap M2 is going to have a problem it will be at the high temp end of the scale and not with the low temps involved in WW. There may well be second or third order arguments about how tough (ie how long an edge lasts), or fine an edge, or hard/easy to sharpen they are, but my experience is that there is not much in it.
-
28th May 2009, 12:38 AM #3
I use a lot of McJing HSS tools while teaching here at Artisans Retreat.
I want people who come to have fun turning, to experience lots of different tool sizes, shapes & grinds. They can then narrow it down to the ones that suit them when they buy their own tools.
I generally dont have a problem with.the McJing steel (& Max is a nice guy too!).
I do tend to prefer P&N tools, mainly because of their cross section and feel, however I also feel they keep a better edge for longer.Artisans On The Hilll - Gallery, Manning Valley Hideaway Accommodation & Workshops.
Ideal Family or Group Getaway!
You all come & visit now - y'hear!
http://www.artisansonthehill.com.au
-
28th May 2009, 09:09 AM #4
Just out of curiosity, does anyone know the length of the Pye and McJing blanks? I presume there's enough meat to grind a tang for the handle and still retain a decent blade length.
.
I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.
Regards, Woodwould.
-
28th May 2009, 09:26 AM #5
Our blanks are 8"(200mm) long and are m42 metal work grade HSS
Cheers Huon
Largest range of Dayacom pen parts in the southern hemisphere.
Why pay more? When the best costs less! www.garypye.com
-
28th May 2009, 10:08 AM #6
I came across this article which may be of interest to those making their own lathe tools.
.
I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.
Regards, Woodwould.
-
28th May 2009, 10:11 AM #7
Thanks heaps. I will give them a go
-
28th May 2009, 10:24 AM #8.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
The Carbatec blanks are 295 mm
-
28th May 2009, 10:51 AM #9
Agree Garry Pye and McJing's are both worthy for ww also we buy the blanks to make cutters and shape them for ornamental turning
-
28th May 2009, 11:20 PM #10Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
I've done a few tools out of McJing blanks and they vary in quality; since there's a deal of work in shaping the steel and fitting a handle you don't want it to be a lottery.
Cheers, Ern
-
28th May 2009, 11:39 PM #11
I bought a McJing 3/8 spindle gouge blank at the Brisbane show last week also a handle. I was pleasantly surprised when I got it home and gave it a bit of a brush on the grinder how nicely it performed. I have a 5 piece set of Hamlets and the McJing tool is just as good in my opinion except for th handle but for the price I am not complaining.Cost was $28 for the blank and $6 for the long handle, so a bargain.
Reality is no background music.
Cheers John
-
29th May 2009, 10:30 PM #12Member
- Join Date
- Mar 2009
- Location
- Lake Cathie
- Posts
- 67
This is also a good article on making homemade lathe tools,
http://www.bigtreetools.com/articles/siegel%2018-4.pdf
I actually found this on this site somewhere
-
30th May 2009, 01:01 AM #13Our blanks are 8"(200mm) long and are m42 metal work grade HSS
...and I have never met Gary of Rohan, nor had any dealings with them, probably will tho'.
I have a McJings rough gouge, a bit ordinary,probably give it away.Inspiration exists, but it has to find you working. — Pablo Picasso
Similar Threads
-
pen turning blanks
By Hambone in forum WOODTURNING - PEN TURNINGReplies: 7Last Post: 2nd May 2006, 04:41 PM -
turning blanks please
By terry phillips in forum WOODTURNING - GENERALReplies: 4Last Post: 7th June 2004, 08:42 PM -
Turning Blanks
By Paulo in forum WOODTURNING - ORNAMENTAL TURNINGReplies: 1Last Post: 22nd April 2000, 09:31 PM