Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Can Ironbark be turned
-
3rd February 2007, 11:47 AM #1Senior Member
- Join Date
- Dec 2006
- Location
- Sunshine Coast
- Posts
- 191
Can Ironbark be turned
I am in the process of restoring an old Qualcast push type lawn mower and it needs a new turned handle and rear roller.
I have plenty of well aged, ie 20+ years western Qld ironbark and thought of using it because it will last.
I have worked with this timber a lot and made book cases and coffee tables with it - sure it is hard on tools, but if they are kept sharp then it is ok - but never tried turning it - don't have a lathe to begin with but thinking of investing in one
Would appreciate any opinions/experiences
Cheers,
Ned
-
3rd February 2007 11:47 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd February 2007, 11:56 AM #2
Can't see why not, stainless steel can be turned with the right gear & know how.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
3rd February 2007, 12:07 PM #3
Of course it can.
You need to be prepared for a bit of regular sharpening and expect a bit of tear out, so quite a bit of sanding.
If its for a roller on a mower...... much less sanding.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
3rd February 2007, 12:32 PM #4Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Use gouges. This is one time when a skew is next to useless.
Being (in most cases) short grained a skew tends to "pick out" little chunks.
As Soundy said a little bit of sanding is needed but it is nice stuff to turn and some pieces come up astounding.
Keep the tools sharp.
-
3rd February 2007, 05:34 PM #5
-
3rd February 2007, 07:52 PM #6Woodworker
- Join Date
- Apr 2006
- Location
- Brisbane
- Age
- 49
- Posts
- 395
Yes it can be turned; I agree with the advice to use gouges. That's the only tool type that works really well, although I have been known to turn a handle out of ironbark entirely with a 1/4" parting off tool!
Basically, use what works -- but it can be done!
RegardsWarm Regards, Luckyduck
-
3rd February 2007, 09:13 PM #7Senior Member
- Join Date
- Dec 2006
- Location
- Sunshine Coast
- Posts
- 191
Thanks to all for the advice - much appreciated.
Stuart - you talking ironbark as in wood or ironbark as in moi??
Going to have to get me a lathe methinks
-
9th February 2007, 11:18 AM #8Ex trade turner
- Join Date
- Jul 2006
- Location
- Bargo, NSW
- Posts
- 35
sure it can be turned, skews, gouges whatever but its hard stuff.
Ive turned some 2m long by about 200mm dia verandah posts and they came up beautiful, bloody hard jobs though.
Similar Threads
-
Grey Ironbark Supplier in Melbourne and the state of Victorian timbers
By thumbsucker in forum TIMBERReplies: 16Last Post: 9th March 2007, 04:16 PM -
What movement to expect from air dried Red Ironbark
By thumbsucker in forum TIMBERReplies: 17Last Post: 17th December 2006, 09:51 AM -
Ironbark??
By End Grain in forum TIMBERReplies: 4Last Post: 5th October 2005, 02:29 PM -
Ironbark species?
By PAH1 in forum TIMBERReplies: 1Last Post: 25th June 2005, 07:33 PM -
water proofing turned jobs?
By TimberNut in forum FINISHINGReplies: 1Last Post: 16th October 2004, 11:47 AM