Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
Thread: Looking for a Handle Maker!
-
5th March 2010, 06:57 PM #1
Looking for a Handle Maker!
My skills and equipment don't (as of yet) extend to turning. When my current project reached a stage where it requires turning, I'm going to have to outsource.
I'm looking for someone to make me two handles to hold the steel rod used as the sliding vice parallel guide stop. (See pic if confused). Two handles for two vices.
The steel rod is 10.5mm in diameter and roughly 250mm long.
I did a quick sketch. My thought was since all the force is on insertion and withdrawl to have it fatter at each end. (Spaced 11cm to allow for my 10cm palm.) The remainder of the bench has some distinctive curves and round overs. This would need to be considered.
The design and size of the handle is not fixed.
In fact, any chisel handle design would also work.
I looked at different options for ferrules and thought the carbatec ones were as easy as any other. Brass is nice. Though the project has elements of chrome, steel, aluminin, and galvanised steel.
Carbatec Ferrules
Inside diameter: 22mm, outside diameter: 25mm, length: 17mm.
So what timber. The bench is made of blackbutt and the vices have rosewood (american) timber. I can supply blackbutt, redgum, or nice tassy blackwood upto ~45-50mm. If blackwood or redgum is choice I might like the vice handles replaced later. Fiddleback or straight.
How would it work?
I'm happy to hear any and all suggestions.
I'm happy to post you the required timber (with return post of course.)
I'm happier to keep the steel and ferrules for assembly here.
I'm happy for you to finish the wood or leave it bare sanded. (The rest of the project is finished with organoil danish.)
I'm happy to chip in a small voucher at carbatec or bunnings for your efforts.
PM or post a message comment here if
Much appreciated.My blog: ~ for the love of wood ~ - http://theloveofwood.blogspot.com/
-
5th March 2010 06:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th March 2010, 07:38 PM #2
If you're desperate I could make them
-
5th March 2010, 08:28 PM #3GOLD MEMBER
- Join Date
- Oct 2002
- Location
- NSW
- Posts
- 1,610
When I looked at your pictures, I thought "Yuck" when I looked at handle design V1.
Hopefully, the attached picture is self-explanatory - this is an alternative handle profile which I saw in the negative space of the existing curves of your bench.
Fill in the blue carpet bit with an 'hourglass' handle, bigger at one end.
Cheers,
Andrew
-
6th March 2010, 04:10 AM #4
Here's a design based on the 'negative' curves from the parallel bar.
I'll come up with a few more designs tomorrow.My blog: ~ for the love of wood ~ - http://theloveofwood.blogspot.com/
-
6th March 2010, 07:55 AM #5
Boz where is you located ??
-
6th March 2010, 10:00 AM #6
I think I know which one I like.
Comments?My blog: ~ for the love of wood ~ - http://theloveofwood.blogspot.com/
-
6th March 2010, 10:48 AM #7
They're all ugly, E without the frills would work
-
6th March 2010, 10:56 AM #8Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
An alt source of ferrules, with a wide range of sizes and cheaper than Carbatec can be found here:
Everything Woodworking
Select Browse, search for and click on Handle FerrulesCheers, Ern
-
6th March 2010, 11:21 AM #9
The Handles.
Hi All,
Yes I agree, they sure are ugly Handles. Like F/C said E without the trimmings.
Ern I use A piece of Aluminum Chair as a Ferrel, & can be cut with a Gouge to sq. the ends. then polished with a bit of OOOO Steel Wool & wack some Beeswax over it.
Certainly saves a few $'s if you are doing quite a few Handles.
Most times the inside of the Aluminum has a rib, & I find this stops the Ferrel from slipping. Well that's my 2 cents worth.
Regards,
issatree.
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
-
6th March 2010, 11:36 AM #10
hmmm...
I actually liked G which is a refined version of arose62's F. (Though I think it was a little thin in the middle.)
Interesting that you say E. That's the traditional chisel design I copied from above which I copied from the sydney wood turners group.
You have to agree, B, sure is ugly. lol. it's like some sort of weird alien space ship impaled into a toilet plunger. anyway, design brain storming is always productive.
That woodworks shop looks great. Expensive though. I've been looking for a good bow saw and few other places sell them. But that's another story.
An alternative design by funkychicken.My blog: ~ for the love of wood ~ - http://theloveofwood.blogspot.com/
-
6th March 2010, 12:01 PM #11Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Blow the aesthetics; this is a push/pull peg isn't it, so a mushroom either end makes sense.
Thanks for the chair leg tip Issatree.
FWIW if the rod was epoxied in here you wldn't need a ferrule in any case; in fact IMO you'd have to glue it in. (Yes, ferrules make the tool look more finished.) Just a thought.Cheers, Ern
-
6th March 2010, 12:29 PM #12
My handle design could work, it's designed for pushing but not pulling but could still work
Free advertising
-
6th March 2010, 01:40 PM #13
My handle design would work too. I don't think you need aferrul unless there is gonna be excessive sideways force.
anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
6th March 2010, 02:08 PM #14Senior Member
- Join Date
- Dec 2009
- Location
- Mandurah WA
- Age
- 60
- Posts
- 351
Just a thought - isn't the ferrule going to mark the leg to some extent sooner or later? Maybe not if you are gentle enough.
If the handle had a larger diameter at the bottom and no ferrule you could shove it in against the leg without marking it.
I still like the look of the ferrule though.
My choice would be along the lines of "f". Flowing curves, easy to grip, not too long.
-
6th March 2010, 03:00 PM #15
Would be happy to do some handles, but too far away as usual.
Interesting blog (whatever that is) T.L. Beautiful first picture and I would ride a bus to see it, but not all the way from here to there.Richard in Wimberley
Similar Threads
-
Furniture Maker
By robduca in forum WOODWORK - GENERALReplies: 1Last Post: 9th November 2009, 01:11 PM -
New Dust Maker
By David H in forum BANDSAWSReplies: 4Last Post: 11th February 2007, 09:50 AM -
In search of a box maker?
By Rusty Lass in forum BOX MAKINGReplies: 8Last Post: 24th February 2006, 12:03 AM -
Toy Maker Mag out
By David L in forum ANNOUNCEMENTSReplies: 3Last Post: 15th December 2005, 07:41 PM -
Maker of Saws
By Art in forum HAND TOOLS - UNPOWEREDReplies: 40Last Post: 14th August 2005, 07:21 PM