Thread: Need manual for barley twist/ flute machine

My guess is that you mount a router on the lathe. What type of router I can not say. How the indexing is determined can not say.

What I might suggest is to mount a round piece between center. Then mount a flat piece on the router plate, in the middle of that drill a hole to mount a pencil. Then have a play to see what is drawn on the wood.

Looks similar to the one trend used to make
http://woodtools.nov.ru/instruc/Tren.../rlatheman.pdf


Another generic version
http://alain7705.free.fr/temp/tourna...-Tools-V.1.doc

Thanks christos just playing with it now your idea worked well with the pencil! Just a few alignment issues! But fun fun fun!

Decideded to go all in! So far so go!

Looks like value for your money!

Thanks for the links
pretty much sorted! Will make some designs to fit the machine, maybe some columns with reeds or flutes, it's going to be a handy tool in the shed saving time making jigs. Will need to get a couple of router bits and push my luck for another router!

I have this same jig, but when I purchased it, was lucky enough to include all the paperwork, which included some plans and ideas.... They are larger than a4 so can't just do a quick copy of them, but I can give the scanner a work out if you do want any more info. The pages are fairly well worn (I got it secondary) but I'm sure I could get something useful to you.

Originally Posted by Gabriel

I have this same jig, but when I purchased it, was lucky enough to include all the paperwork, which included some plans and ideas.... They are larger than a4 so can't just do a quick copy of them, but I can give the scanner a work out if you do want any more info. The pages are fairly well worn (I got it secondary) but I'm sure I could get something useful to you.

That would be great Gabriel the more info the better!

Gabriel if you have not scanned manual yet not to worry think I have got it sorted! Nearly! Worked out where I was going wrong indexing and the spacing has improved! Operator malfunction!

Originally Posted by chuck1

Gabriel if you have not scanned manual yet not to worry think I have got it sorted! Nearly! Worked out where I was going wrong indexing and the spacing has improved! Operator malfunction!

All good, It only took me 20 mins, and it means I can acutally give back to you blokes that are always willing to help out someone like myself (more questions than answers usually)

The only issue I have is it is about 30 meg of material (must have had the dpi set a little high) so I'm not sure of the best way to get it to you. I will try uploading it to my files.....ERROR.....

Damn, ok, file is too big...

just tried emailing it to myself.... apparently that is too large as well... GRRRR... can't compress it anymore... I tried that too......

any ideas?

Originally Posted by Gabriel

any ideas?

Dropbox?

Originally Posted by Skew ChiDAMN!!

Dropbox?

Alternatively, 'TransferBigFiles': https://www.transferbigfiles.com/
You don't need to join for files up to 100MB. Ignore the 'Create an account' etc and just add your files, then follow the prompts.

Ok, I have installed dropbox, and uploaded it onto there. I hope you have access to it, if not then we can work on another solution (Even if that involves me getting a stick and snailmailing it to you!!) I guess you need to PM me some details on dropbox? anyhoo.....hope we can sort it out for you

Thanks Skew ChiDAMN!! and Hermit for the thoughts.....

Cheers

Gab

Hey Gabriel my computer skills are dodgey at best I'll try pm you with some details etc! Many thanks!