Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
19th June 2008, 01:20 PM #1
Peppermill and salt mill instructions
Hi I bought the ceramic ones from Jim the all in one shaft does anyone know wher I can find a easy to follow instructions please? This is the link to the one I have bought here
thanks Toni
-
19th June 2008 01:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th June 2008, 02:01 PM #2
Toni, I have the instructions for them on my other computer at home, but I'm on the road at the moment, so I'll email them to you tonight when I get home
Cheers
DJ
ADMIN
-
19th June 2008, 02:47 PM #3
ok thank you
Toni
-
19th June 2008, 03:26 PM #4
I do not have the instructions but they are a good kit and work well
Cheers Rum Pig
It is easier to ask for forgiveness than permission.
-
19th June 2008, 09:00 PM #5
Toni instructions sent.
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
20th June 2008, 09:22 AM #6
Hi Jim
I have been looking for instructions for these as well for a while. Any chance you could email me a copy as well.
Cheers.
Benji
-
20th June 2008, 10:07 AM #7Brigalow Buster
- Join Date
- Mar 2006
- Location
- Marlborough Qld
- Age
- 88
- Posts
- 27
Hello Toni
I have bought four sets of these without instructions.If you google the name of the grinders you will get a wealth of instructions from over the world.This is a bit like the ABC and I dont think I am allowed to mention the brand name.
Robert
-
20th June 2008, 10:18 AM #8
Yes there was a lot of wealth out there but I could not understand it.
I need basic instructons and this one I got sent was just what I needed It is 19 steps for me so I am excited. One of these are on the plans for this weekend
bye
Toni
-
20th June 2008, 10:40 AM #9
The instructions you get from Jim are easier to follow than the ones you get from the net.
macca
-
20th June 2008, 01:33 PM #10Brigalow Buster
- Join Date
- Mar 2006
- Location
- Marlborough Qld
- Age
- 88
- Posts
- 27
Sorry I have just finished my fourth set of mills and did not know Jim had instructions for them.Just shows you the wealth of this forum.Thanks. Robert
Similar Threads
-
Large Salt & Pepper grinder mill
By STAR in forum WOODTURNING - GENERALReplies: 1Last Post: 21st December 2007, 08:16 PM -
Comparison Between C.S Mill & Bandsaw Mill
By echnidna in forum SMALL TIMBER MILLINGReplies: 2Last Post: 7th October 2007, 04:26 PM -
Old Salt
By OLD SALT in forum FINISHINGReplies: 1Last Post: 31st July 2006, 10:09 PM -
Salt and Pepper Mill Mechanisms
By MalA in forum WOODTURNING - GENERALReplies: 10Last Post: 13th November 2003, 11:39 PM