Needs Pictures: 0
Results 1 to 8 of 8
Thread: Poseidon's Platter Too
-
15th January 2019, 01:34 PM #1
Poseidon's Platter Too
"Poseidon's Platter Too"
it's 14 1/2" D X 9 1/2" tall. The center is White Oak the Scalloped edge is segmented Walnut, the Dolphins are also Walnut. This piece needed a base so here's what I came up with. The base turned, cut & carved plus I added three hand carved Sea Horses.Jack Of All Master Of None
-
15th January 2019 01:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th January 2019, 01:38 PM #2
Beautiful, thanks!
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
15th January 2019, 09:47 PM #3
Thank you very much Rob.
Jack Of All Master Of None
-
21st January 2019, 06:08 AM #4
Woodturners Unlimited
It's my honor to be able to pick the next Turning of the Week. This was much harder than I thought it would be, with all the extremely talented tuners in this group. After a long and hard look I've decided to pick "Poseidon's Platter Too" by Bruce Jones as the next turning of the week. Every time I scroll up to it I can't help but to zoom in on all the pictures and become mesmerized by all the detail that was put into this piece. The platter, which was done first, is a piece of art in itself. The separate base really raises this piece to a whole new level. While the piece as shown in the photos is amazing, I can only imagine the amount of detail that can be seen in person. Congratulations Bruce, this is a piece to be proud of!Jack Of All Master Of None
-
24th January 2019, 10:11 PM #5SENIOR MEMBER
- Join Date
- Aug 2017
- Location
- Canberra
- Posts
- 587
hows this a turn though. its too fantastically crafted to be a turning
-
25th January 2019, 12:04 AM #6
-
30th January 2019, 09:54 PM #7
Just wow!
Don't Just Do It.... Do It HardenFast!!
Regards - Wayne
-
1st February 2019, 10:00 AM #8
Similar Threads
-
Poseidon's Platter
By splinterz25 in forum WOODTURNING - GENERALReplies: 11Last Post: 16th January 2019, 07:18 AM -
a platter
By Faulko in forum WOODTURNING - GENERALReplies: 11Last Post: 23rd April 2015, 07:36 PM -
The platter
By powderpost in forum WOODTURNING - GENERALReplies: 22Last Post: 2nd June 2009, 07:37 PM -
a Platter ???
By nine fingers in forum WOODTURNING - GENERALReplies: 20Last Post: 6th April 2009, 03:50 PM -
New platter
By powderpost in forum WOODTURNING - GENERALReplies: 18Last Post: 17th January 2009, 10:25 PM