Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Technatool Nova 3000 Drive belt
-
28th April 2015, 02:17 PM #1New Member
- Join Date
- Apr 2015
- Location
- Loch Sport
- Posts
- 6
Technatool Nova 3000 Drive belt
Can anyone tell me where I would go to get a replacement drive belt for my Nova 3000
Thank
Terry
-
28th April 2015 02:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th April 2015, 03:05 PM #2
Not sure where you are located I got one through Trend Timbers NSW.
Other wise find your self a decent belt supplier and they should be able to fit you with one.
-
28th April 2015, 03:16 PM #3New Member
- Join Date
- Apr 2015
- Location
- Loch Sport
- Posts
- 6
Thanks Whheelinaround, I'm in Victoria in Gippsland, I'll contact Trend if I cant get anything down this way.
-
29th April 2015, 12:10 PM #4GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
When I had the same lathe I bought mine from CBC Bearings: http://www.conbear.com/. 99% of the time they'll have to order one for you. Hope there's one near you. If you can't, try some sort of bearing supplier.
-Scott
-
29th April 2015, 01:07 PM #5SENIOR MEMBER
- Join Date
- Dec 2013
- Location
- Mt Waverley Vic 3149
- Age
- 81
- Posts
- 679
LatheBelt.jpg
This is the belt on my Nova 3000.
The belt is coded "Micro - V 240j 610mm"
I would have bought it from Talair Industrial Supplies, Osborne Ave., Springvale. (03) 9546 1033.
Ask for Ian or Dean
Bob
-
29th April 2015, 01:38 PM #6Senior Member
- Join Date
- Mar 2012
- Location
- sydney
- Posts
- 156
belt
http://www.ebay.com.au/itm/Replaceme...item3aa8a871bc
Here it is
Cheers
-
29th April 2015, 02:00 PM #7Senior Member
- Join Date
- Dec 2007
- Location
- Melbourne Australia
- Posts
- 230
I got a replacement a few years back from Rydell in Cheltenham Vic
http://www.rydell.com.au/index.php?page=gates-ind-belts
Cost was $20 (their minimum charge). I should have bought 2 as the second would have only been a few dollars more.
-
29th April 2015, 05:39 PM #8SENIOR MEMBER
- Join Date
- May 2013
- Location
- Somerset Region, Qld, AU.
- Age
- 66
- Posts
- 602
I bought one for my Nova 3000 back in early 2013. Carbatec (Teknatool Agents in Aust) had the belts in stock - from memory it cost me about $15.00.
Manufacturer of the Finest Quality Off-Cuts.
-
29th April 2015, 05:52 PM #9
Just take your old belt down to your local bearing & belt supplier, much cheaper there
Neil____________________________________________Every day presents an opportunity to learn something new
-
30th April 2015, 01:04 PM #10
-
1st May 2015, 11:45 AM #11
-
8th May 2015, 10:37 AM #12Member
- Join Date
- Jun 2013
- Location
- Loch Sport
- Posts
- 86
Thanks for your replies. Carbatec in Melbourne have 1 in stock and there are 2 in Brisbane. Melbourne Carbatec is a 8 hour return trip for me so I will look at other belt suppliers closer and see what I can get.
Similar Threads
-
Technatool nova dvx lathe
By FullBurl in forum WOODTURNING - GENERALReplies: 7Last Post: 12th October 2009, 07:44 AM -
Nova DVR 3000
By CanFly in forum WOODTURNING - GENERALReplies: 29Last Post: 1st May 2005, 04:07 AM -
Nova 3000
By DarrylF in forum WOODTURNING - GENERALReplies: 7Last Post: 31st January 2003, 11:33 AM -
Nova 3000
By Nuggett in forum WOODTURNING - GENERALReplies: 5Last Post: 10th September 2002, 12:57 AM -
Nova 3000
By Rod in forum HAND TOOLS - POWEREDReplies: 9Last Post: 24th August 2000, 10:13 AM