Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: What timber is it
-
25th January 2017, 08:52 PM #1Novice
- Join Date
- May 2013
- Location
- Macksville NSW
- Posts
- 11
What timber is it
Can anybody help me identify a timber I have been turning for a couple of years.Live near Bowraville ,NSW,and there were 5 dead trees on the boundary with neighbours. About 200mm at base,approx 10 metres tall without many spreading branches.Timber is hard,fine grained,greyish brown, with obvious concentric rings .Sorted through the old split stuff and put the rest aside.Have made good replacement chisel handles and even some turned fishing lures.The most obvious way I could describe it is by the smell it gives off while turning.Just like rotting oranges.Have asked a few old hands around but they have no idea.Reason I,m asking is that a lady I,m making stuff for would like to know what the timbers are I use.Any help would be greatly appreciated.
Thanks,Flathed
-
25th January 2017 08:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th January 2017, 09:37 PM #2
Can you post a pic of it perhaps showing the colour and grain may be able give some of our timber gurus something to run with and help you out.
Dave,
hug the tree before you start the chainsaw.
-
26th January 2017, 11:47 AM #3Senior Member
- Join Date
- Sep 2013
- Location
- Cherrybrook,NSW
- Posts
- 344
possible brown barrel
-
26th January 2017, 12:24 PM #4SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Nth of Newcastle
- Age
- 77
- Posts
- 811
If they seem planted they could be anything , but if they seem naturally seeded have a look around for other trees with the same form,etc.
-
27th January 2017, 10:59 AM #5
Photos are definitely needed, of the timber (end grain, long grain, side grain etc) and the tree (overall, bark, leaves, flowers, seeds - whatever you can get)
Neil____________________________________________Every day presents an opportunity to learn something new
-
27th January 2017, 06:51 PM #6Novice
- Join Date
- May 2013
- Location
- Macksville NSW
- Posts
- 11
Mystery timber
Unfortunately they have been dead for a while,so no leaves,flowers seeds etc.Hope the end grain and bark pictures might be useful.What type 002.JPGWhat type 001.JPG
-
27th January 2017, 10:47 PM #7SENIOR MEMBER
- Join Date
- Dec 2011
- Location
- Buderim qld
- Posts
- 842
What about some photos of the standing trees or have they all been cut down? Were they equidistant from each other or in a row or growing randomly? Could they have been exotic? What does your neighbour know about them? Are you on a town block or acreage? The bark looks a bit similar to bloodwood and I note you are only about 20klm from the coast. You say a smell like rotten oranges; is that the opinion of others who have smelt it?
-
28th January 2017, 06:37 AM #8SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Nth of Newcastle
- Age
- 77
- Posts
- 811
Looks like some White Cedar, Melia azedarach, I cut recently. Phil
-
28th January 2017, 04:54 PM #9
-
30th January 2017, 07:45 PM #10Novice
- Join Date
- May 2013
- Location
- Macksville NSW
- Posts
- 11
Limited information
Thanks for the help guys.Old neighbours moved, so cant get any help from them.I havent dealt with white cedar before,but this timber is a lot harder than any red I,ve ever seen.All the trees were about the same size,and looked like they had been dead for a while.Just have to keep looking I guess.
Similar Threads
-
Finishes on open grained timber versus closed grain timber
By Pauls321 in forum FINISHINGReplies: 5Last Post: 15th November 2012, 05:35 PM -
Looking to purchase Jarrah timber, Jarrah Burl timber or Marri timber measurements >>
By EduardElGran in forum WOODWORK - GENERALReplies: 1Last Post: 10th April 2012, 08:42 AM