Thread: Trouble Sourcing a Drive Belt

Have you tired a washing machine repairs place? As they had a size to get me out of trouble with a really old sher lathe I had!

Thanks I'll check that out. Thought most washing machines would be a V belt.

You can buy them on ebay made to your specified length, I bought one not to long ago was about $25 from memory shipped from the US took about 3 weeks to arrive.


The seller is used was ohioblademan

http://www.ebay.com.au/usr/ohioblade...84.m1439.l2754


joez

Years ago when I faceted gemstones, the machine I used had a PU drive belt that was joined by melting the two butt ends together on a stove hotplate. You had to be quick, but it may get you out of trouble until you get a replacement belt.

Of course you will need the old belt or something similar from a belt drive washing machine or dryer.

Good Luck!

Originally Posted by joez

You can buy them on ebay made to your specified length, I bought one not to long ago was about $25 from memory shipped from the US took about 3 weeks to arrive.


The seller is used was ohioblademan

http://www.ebay.com.au/usr/ohioblade...84.m1439.l2754


joez

Cheers joez will look him up

Originally Posted by ACT_Grumbles

Years ago when I faceted gemstones, the machine I used had a PU drive belt that was joined by melting the two butt ends together on a stove hotplate. You had to be quick, but it may get you out of trouble until you get a replacement belt.

Of course you will need the old belt or something similar from a belt drive washing machine or dryer.

Good Luck!

I did try repairing the one that broke. I don't have a hot knife and tried using a candle. It melted fine but the join was weak. Maybe it was too hot

Just ordered one online at http://www.aussiesapphire.com.au/