Thread: First venture into bowls
13th Jan 2019, 10:11 PM #1
First venture into bowls
Santa bought me a Robert Sorby Turnmaster with Carbide tips so decided time was right to have a go at some bowls.IMG_0317.jpgIMG_0306.jpgIMG_0307.jpg
This is bowl number 1 and is a piece of mango branch that I had laying around to practice cove and beads on. I ended turning it end grain for no other reason than that was how it was chucked for the other practice. It was a longer piece so I did the internal work first, then the outside then parted it off the remaning piece after sanding and applying finish. As a first attempt at bowl turning I was fairly pleased with the result.
Bowl number 2 was complete with only the tenon to trim off so I turned a scrap piece to use in jam chuck mode. Tailstock center was in middle of tenon and I was slowly paring the tenon down when the remaining tenon sheared off releasing the bowl doing 1000 rpm to rattle back and forth between headstock and tailstock. An attempt to remove the knocks and gouges was not successful so it became decorative firewood.
Having learnt my lesson, I turned this bowl by screwing to a face plate and doing the bottom before making a dovetail recess for the chuck. Applied finish to bottom then set up in chuck to do the inside. I have since learnt that this is a piece of white cedar. I love the way it changes colour as you move it around in the light. The new tool got a good workout as the blank was square and the front and back were very unparallel. Took 2 hours to flatten one side and get it round. Finish is BLO and shellac mixed with metho. About to order some EEE and shellawax. Left the dovetail recess so I can play with this one.
Interesting learning curve on these and happy with how they turned out.
13th Jan 2019 10:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Advertising world
14th Jan 2019, 02:54 AM #2GOLD MEMBER
- Join Date
- Sep 2008
- North Carolina, USA
You have learned quickly. Bowl 3 is lovely, nice shape, nice finish.So much timber, so little time.
14th Jan 2019, 07:44 PM #3
Hi mac , it, s amazing how quickly you can learn by your mistakes , well done !
15th Jan 2019, 09:05 AM #4
Just out of curiosity - I'd like a first-timers perspective - did you notice any difference with the way bowl #1 and bowls #2 & 3 hollowed out?
Or were you already aware that you should "work downhill from the grain" and actually cut #1 backwards to the others? (ie. cut from centre outwards rather than rim inwards)
- Andy Mc (AKA "Ghost who posts." )
15th Jan 2019, 10:39 PM #5
Interesting question. Bowl #1 I just dug in working both in toward the center and out away. I did find it hard to get a smooth curve in the shape. I don't own a decent curved scraper so had difficulty removing tool marks and the inside still feels a bit furry. For bowls2&3 I used a frostner drill bit to open up the centre and worked out from there. I still am very naive when it comes to the effects of grain on these bowl turnings. I have seen tear out and generally manage to clean up with sharp tools and sanding. Bowl 2 and 3 were easier to turn once I got them round and flat and shaping was a lot quicker.
By Chrome in forum WOODTURNING - GENERALReplies: 3Last Post: 6th Jun 2012, 08:00 PM
By animal.13 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 4Last Post: 4th Jan 2012, 10:43 PM
By tommohawk in forum WOODCARVING AND SCULPTUREReplies: 4Last Post: 29th Jan 2010, 06:41 PM
By MiddleAgesMan in forum Michael Storer Wooden Boat PlansReplies: 20Last Post: 28th Apr 2009, 12:37 PM