Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Vermeer
-
18th September 2017, 09:17 AM #1Intermediate Member
- Join Date
- Mar 2013
- Location
- Illinois
- Posts
- 28
Vermeer
Does anyone here use the Vermec sphere cutting jig? What is your opinion on it?
-
18th September 2017 09:17 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th September 2017, 09:43 AM #2
Good solid unit that works well. My main complaint is that the bearing housing is so large the maximum size of the sphere you can turn is limited.
I ended up making my own similar to the Vermec but with a base with a sleeve so I could use it on my large Jet and my smaller WoodfastNeil____________________________________________Every day presents an opportunity to learn something new
-
18th September 2017, 12:13 PM #3
Have one of Enzo's original to suit a Vicmarc VL300 and it is still working great. It didn't have a centering pin like the later ones but Enzo gave me a new main shaft with a pin when I had a trip to Queensland. Well made and highly recommended solid gear from a great bloke. PS Enzo is the owner of Vermec as I just saw that you are in the US.
-
19th September 2017, 12:34 AM #4
-
19th September 2017, 07:14 AM #5SENIOR MEMBER
- Join Date
- Nov 2013
- Location
- Bonbeach, Vic
- Posts
- 154
Hi Mike,
I picked up a second hand one a while back and it greatly speeds up the turning of a sphere compared to using a template. Very nice finish as long as the cutter is sharp.
Only thing to note is you will still have to deal with the nib at the headstock / chuck end.
cheers
Phil
-
19th September 2017, 10:27 AM #6
-
19th September 2017, 02:16 PM #7SENIOR MEMBER
- Join Date
- Dec 2011
- Location
- Buderim qld
- Posts
- 842
I have that one, plus a lot of other products made by Vermec. They are all beautifully engineered and Quality with a capital 'Q'.
-
19th September 2017, 02:18 PM #8
-
19th September 2017, 09:16 PM #9Intermediate Member
- Join Date
- Mar 2013
- Location
- Illinois
- Posts
- 28
Thanks for all the information will try to get in touch with him on buying.
-
20th September 2017, 10:23 AM #10Senior Member
- Join Date
- Sep 2010
- Location
- Brisbane
- Posts
- 159