Thread: Lawnmower won't start when hot!
2nd Jul 2007, 01:12 AM #1Senior Member
- Join Date
- Dec 2005
- Western Australia
Lawnmower won't start when hot!
Not sure where to put this question, so thought I would start here....
I bought a secondhand lawnmower the other day, it is a 11 year old Masport 4 stroke. It goes really well, starts first time, every time, two pumps of the primer and pull the cord, away she goes. Has a bucketload of power, cuts my buffalo lawn with ease.
The problem I have is that it doesn't restart when hot. I have two lawns, and I can't mow one, turn the mower off, and move it to the next lawn, cause it won't restart! I have to idle the mower all the way down the side of the house to the front lawn.
I tested it again today. I pulled it from the shed, primed it, then pulled the cord, bang, away she goes! Let it idle for 10 minutes, turn it off, and it wouldn't start.
Any ideas as to what is wrong? Or and advice as to further tests I can do to establish what is wrong?
2nd Jul 2007 01:12 AM # ADSGoogle Adsense Advertisement
- Join Date
- Advertising world
18th Mar 2008, 08:38 PM #2
At a guess, it is either a compression, spark or fuel problem, more than likely a compression or spark problem.
1. Compression - check the compression (with a compression guage) when it's cold and again when it's hot. If there is a dramatic difference, then it's stuffed and will need some work (new rings and maybe a rebore).
2. Spark - when hot, remove the spark plug lead from the plug, connect it to a spare plug and earth the body of the plug to the engine, using a suitable clamp to hold it in place. Pull the starter cord and if you can see a spark jump across the gap betweeen the electrode and the plug's body, then all is OK. If not, then maybe the coil/points/sender are buggered.
3. Fuel - unlikely, but if the above test OK, then maybe a fuel problem.
P.S. This post is so old, he's probably gone a bought a new mower by now.The first step towards knowledge is to know that we are ignorant.
18th Mar 2008, 08:46 PM #3Most Valued Member
- Join Date
- Jun 2003
18th Mar 2008, 10:02 PM #4
Valve clearance may be too tight and is holding the exhaust valve open when hot.
19th Mar 2008, 12:31 AM #5Of course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
By silentC in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 31Last Post: 19th Jul 2006, 10:16 AM
By JDarvall in forum WELDINGReplies: 36Last Post: 9th Mar 2006, 12:29 PM
By notrot in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 19Last Post: 13th Sep 2005, 05:54 AM
By Bob Willson in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 28Last Post: 29th Mar 2005, 12:16 PM
By jackiew in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 85Last Post: 6th May 2004, 06:43 PM